Observations on Set up

[GreenCello]

I've been flying and tweaking my little Guai for a couple of weeks now and thought I'd share some of what I've learned
Guai EP200 belt drive, stock motor,esc,battery, 3Xhs45, logitech 2100/3100, DX7

I originally had the tail servo ball at 10.5mm from the servo center and 65 gain on the DX7 gyro sens menu and still had a slight wag mostly in hover that I couldn't get rid of by changing the gyro gain. Moved the ball to 8.0mm and set the gain up to 76 eliminating the wag.

When flying slow circuit in a 15 X 40 meter area the heli would settle as I lost transation lift in slow turns and I really had to add more throttle/collective than I liked. Curves were:
Throttle N 0 50 80 - 100
Id1 100-80- 100
Pitch N 40--50--100
Id1 0--------100
Change to:
Throttle N 0--60--85--100
Id1 100--85--100
Id2 100--90--100
Pitch curves unchanged

After bumping up the throttle just a few points and flying circuit in Id1 the headspeed and altitude control were much improved

BTW does anyone know where the name Guai comes from and how you pronounce it?

[SurfCity]

BTW does anyone know where the name Guai comes from and how you pronounce it?

It's spelled Gaui, which is pronounced GOW-ee. Here's the company info. (http://www.gaui.com.tw/index_en.html)

[GreenCello]

Thanks. The dyslexia kicks in now and thne.

[yongary]

its gaui not guai;)

[J-Heli]

Thanks. The dyslexia kicks in now and thne.

Then... :)

[rotorhead58d]

here we go again:roll::YeaBaby:

[J-Heli]

here we go again:roll::YeaBaby:

I was about to say... haven't we been through this before. :)

[jrhf]

I know this is just a funny conicidence, but you may know that GAUI suppliers have originally had spelling problems too. For example, on the paper box for the EP100SE I own, the red inprint on the box reads GUAI. Though Gaui havent let it this way, they have placed a white sticker over it with correct "GAUI". There's about six such stickers on the entire surface. :)
Similar went with the 'Electonic' on the former red labels. I've sent them a note about this, but it took them more than about half year to fix it.
Just my 2 cents.

[psindrup]

Curves were:
Throttle N 0 50 80 - 100
Id1 100-80- 100
Pitch N 40--50--100
Id1 0--------100
Change to:
Throttle N 0--60--85--100
Id1 100--85--100
Id2 100--90--100
Pitch curves unchanged

After bumping up the throttle just a few points and flying circuit in Id1 the headspeed and altitude control were much improved

What mode are you flying in?

Peter

[GreenCello]

Idle 1