PDA

View Full Version : Throttle and picth pumping in 14 MZ


skurniaw
07-18-2008, 12:06 AM
Hi,
I got problem with the throttle and pitch on my 14MZ whenever the throttle stick is located around 30% position and up.
The radio suddenly give the command to do pitch pumping. But it did not happen whenever the throtle stick below 30%

Could it be the potentiometer of the stick ? or the programming ? since it all happened on all models, even after I make a new model in it.

Thanks for the help.

Best regards,
Skurniaw

corona007
07-18-2008, 12:09 AM
Sounds like you have some type of mixing. Check all mixing, I have a 12z and ran into that prob. ***** to find too!

Knud Pedersen DENMARK
07-20-2008, 08:44 AM
Hi

I have a 1,5 year old 14mz.
It began to sudden give roll cyclic, without I moved the stik....
I copied my model into another 14mz, i then the problem was gone.
I send my 14mz to Robbe Germany, and thet switch all potentiometers.

210 euro for:
- four new potentiometers
- complete checked through the Radio
- new front display (had scratces)
- and postage from germany to Denmark

It took about a week to get it fixed

ChopperKnud

Wirestealth
07-25-2008, 02:29 PM
I have the same problem right cyclic

what is the solution?


Thanks

Nuno