PDA

View Full Version : removal of pinion set screws from motor

deepak
07-18-2008, 07:04 PM
Any Ideas on how to remove a rung set screw from a pinion and motor shaft.
Been through 3 drill bits with no luck
D
helicraze
07-18-2008, 10:27 PM
Eziout screw remover. Or just grind it with the dremel and destroy it.
OICU812
07-19-2008, 01:11 AM
If there is any bite at all left, you can heat it, and tap in the driver and you'll likley get it out.
deepak
07-19-2008, 03:36 PM
Hey Guys
I managed to cut it off by using the dremel cutting disc.
Thanks for the advice
D