sanwa rd6000 and belt cp ???

[barks]

hi all,

i had an issue with the heli suddenly jerking right or left! i found it was the tx and cleaned the pots. its ok now but i wanted a better tx.
i used to have a sanwa rd8000 super with my raptor and so bought a second hand untested sanwa rd6000 quite cheep.
i cant get it to work but dont know it it should work with the stock rx and crystals?
i set it up as i thought it should be (ppmfm and 120 swash) and swaped ch 1 and 2 on the rx but there seams to be no output?
can anyone tell me if it should work with the stock rx and crystals please?
if so has anyone got a decent picture of the lower pcb?
thanks
barks

[Ber60]

Hi barks
I don't have a sanwa rd6000 but here are some thoughts
Crystals only work if it is matching with the radio frequenty. A 35Mhz radio with 35Mhz band crystals, or 70Mhz radio with 70Mhz band crystals.
So this is the first thing I would check is are the crystals matching the radio freq.

[barks]

thanks,
i think i have the answer,
the snwa rd6000 dosent always work with the esky crystals so im looking for some sanwa or compatable ones.
thanks
barks