View Full Version : Condor tail Boom
07-20-2008, 01:33 PM
Any one had trouble with the condor boom fitted into the preadator boom mounts? my boom still moves no matter how tight i get it ! the only thing that stops it twisting is the cutout in the boom i hovered my turbine today for the first time what a heli ! just need to sort the hover and throttle curves now
07-20-2008, 06:01 PM
ive done the conversion with no probs try 2 turns masking tape cut out the lock ing bit that
stops the tail from rotating
use center stick 0 degrees pitch no move than 5 degrees neg 11 degrees top stick
ive used the throttle curve recomended by wren
it works go from there m8
regards dave p
07-21-2008, 03:00 AM
Yes the masking tape is what I've done too. The new Century kits seem to have fixed this little irritation. 2 sets of boom supports are the order of the day with the Condor tail Mini, or else your tail may vibe a little.
07-21-2008, 05:00 AM
BB I did notice the boom yesterday i have condor boom supports.
I know i need another set how long is your 2nd set ?
07-21-2008, 04:16 PM
Any length you like Mini, I just cut some carbon tube until it looked nice.
07-21-2008, 04:27 PM
I fitted the original 60 size boom supports that came with the kit it looks the part! I will try it at the weekend and see it that cures the vibration