HowNot2fly
07-20-2008, 05:35 PM
as i said before ( http://helifreak.com/showthread.php?t=84343 ) i`m selling all my small helis,here it is :
HBFP - 4200kv main motor (outrunner), 4108kv tail motor (inrunner) ,30A esc for main plus programing card,15A esc for tail,M24 main blades,GWS 4530 tail prop (DD),fiber frame,2ch signal converter ,this bird is a wild animal and needs fine tunning on mix and gain,
Lama V3- all Extreme upgrades including SE180 motors with 2 extra sets of brushes,harden blades,all metal short flybar with addjustable weights,all metal upgrades less swash plate,i order the swash plate from HL over 3 months ago and its still on backorder,as soon as i get it i will sent it to the buyer,this little bird was flying grate before all upgrades and even better after upgrades but then it developed strange problem,as soon as gets light after spool up it wants to tip over (not spin),after 30 min. i give up on trying to figure it out,no time for small helis,
Elite 3D pro kit- this is a brand new kit ,i opened the box to see whats in it and put it away,once again no time for small helis,
Century Bell 222 scale body (x2)- those are cheap plastic scale bodys ,i was gonna put it on HBFP,never got to it,
ThunderPower TP-425 lipo charger- 0.3A to 2.5A ,1 to 4 cells
E-sky 4ch tx (x2)- one works grate but the other one does not,the only thing that i can see wrong with it is that top two pieces of antena came loose,this should not effect the tx so there must be another issue,you can switch the crystals or you can get brand new e-sky 4ch tx for $7.95 at xheli,
few extra parts for HBFP and Lama including extra 2ch signal converter,i was going to convert Lama to BL but never got to it,once again no time for small helis,
$250 obo including shipping ( US only)
HBFP - 4200kv main motor (outrunner), 4108kv tail motor (inrunner) ,30A esc for main plus programing card,15A esc for tail,M24 main blades,GWS 4530 tail prop (DD),fiber frame,2ch signal converter ,this bird is a wild animal and needs fine tunning on mix and gain,
Lama V3- all Extreme upgrades including SE180 motors with 2 extra sets of brushes,harden blades,all metal short flybar with addjustable weights,all metal upgrades less swash plate,i order the swash plate from HL over 3 months ago and its still on backorder,as soon as i get it i will sent it to the buyer,this little bird was flying grate before all upgrades and even better after upgrades but then it developed strange problem,as soon as gets light after spool up it wants to tip over (not spin),after 30 min. i give up on trying to figure it out,no time for small helis,
Elite 3D pro kit- this is a brand new kit ,i opened the box to see whats in it and put it away,once again no time for small helis,
Century Bell 222 scale body (x2)- those are cheap plastic scale bodys ,i was gonna put it on HBFP,never got to it,
ThunderPower TP-425 lipo charger- 0.3A to 2.5A ,1 to 4 cells
E-sky 4ch tx (x2)- one works grate but the other one does not,the only thing that i can see wrong with it is that top two pieces of antena came loose,this should not effect the tx so there must be another issue,you can switch the crystals or you can get brand new e-sky 4ch tx for $7.95 at xheli,
few extra parts for HBFP and Lama including extra 2ch signal converter,i was going to convert Lama to BL but never got to it,once again no time for small helis,
$250 obo including shipping ( US only)