PDA

View Full Version : X9303 and 401 in T-Rex500


Peter10654
07-22-2008, 07:43 AM
Hi Guys,

I've a problem with my Heli and maybe it is a radio problem.

During hovering my heli tail drifts extremly slowly to the right. It seems following:

Hovering stable 1second, 2seconds, 3seconds, and "whops" short tail drift (about 1cm) to the right, again stable 3-5secondes and short drift again over again.

During pitch the tail is stable.

All in HH Mode !!

Now someone told me that the JR Radios maybe has a center problem and the trim isn't centered correctly even though the trim is centered on the radio and sometimes i put my battery cable to the ESC the Gyro doesn't accept the HH Mode even though the HH Switch is correct. I try 2 or 3 times disconnect and connect the battery and HH is accepted.

Can somebody confirm these problem and what could be the prob?

Cheers

Peter

Pinecone
07-22-2008, 10:21 AM
Did you rebind after completing setup?

Peter10654
07-22-2008, 10:22 AM
Yes i do ! But i don't remeber if you rebind after changes again. Maybe...

I try it again.

Jim T
07-22-2008, 10:25 PM
I've got the same problem, only to the left. Mine started doing it after a crash requiring new main gear and new rotor and main blades.

Jim

Peter10654
07-23-2008, 03:25 AM
I have had no crash ever with the Rex and this gyro !!

Hm ??