"Converting" my Fury to OS engine?

[cdrking]

Ok so I'm getting really fed up with the lack of support from YS. No engines to be had and very few parts. I like the engine but this is getting ridiculous.

If I want to switch my Fury to an OS engine what do I need?

Side plates
C-spec with what head?
What is the big bore?
What about pumping it?
What muffler to run?
Gearing?

Anything else you can think of.

Thanks,

Jeff

[DavidH]

8.18 gear ratio.
Side plates for 8.18

If your running 8.45 now. You will need some shims to shim the motor. You will need 1 115-47 shims on each side.
Or you will need the 115-50 and 51 motor mounts .

CSpec stock will work. The stock Cspec head will be tight in the shroud, but will work.
The Big bore is a modification that OMI does to the 60 K carb. He does this along with the Cline regulator. This will definitely provide more power.

I prefer the Cline system over the PS engine. The PS will run good, but the Cline is just my preference. I have also seen several stock C Specs running great.

As for muffler, the Hatori SB 17 or 18.

David