7UAFS-7UAPS converion to 7UHFS-7UHPS

[Skybolt]

Does anybody knows how to convert the older generation of Futaba
transmitters (7UAFS-7UAPS) from airplane to helicopter so that the switches are in the correct positions.

These older transmitters make great simulator radios and you do not wear out your new ones.

[DavidH]

Easiest way to me.
On the Airplane version.
Take the 3 position switch on the front right side that is labeled mix. Move it to the top left front corner. Move the top left front corner switch to the top right front corner.
Then move the top right corner switch to the position on the front right where the mix switch was located.

Then you will have the same switch setup as the heli version. You have to move the wires with the switches also. Not just the switches.

David