LiqrSicc
07-24-2008, 01:54 AM
Ok guys, I'm just about done with this one. Spent over $400 on this little thing already. It's taking away from my Gaui funds so here it is for sale:
Walkera 4#3B complete with everything it came with and original packaging. Now here area all the new parts I have for it:
2 sets main rotor blades
tail boom
main motor (long can)
tail gear
tail rotor blade
4#3 main gear
4#3b main gear
bearings
linkage sets
Now for the upgrades:
MIA g10 flex frame set
MIA tuff skids
MIA hardware kit
NEW MIA antenna and battery mount kit
NEW MIA 32 AWG wire
NEW MIA canopy
10 brand new o-rings
MIA main blade spacers
MIA red anodized collar w/orings
MIA deluxe flybar stabilizer kit
10 new orings
2 NEW rchobbyhelicopter 3.7v 500mah lipos
t-bitz heatsink
You also get whatever came in the box of the 4#3 including the radio, charger and batteries(total of 2 batts) of course. There is also some sim cord or trainer cord included. Also the original canopy.
Now on the heli itself I have installed the heat sink, MIA flybar stabilizer, MIA metal collar, and the MIA direct drive tail.
Bad news? Not really. It'll need to be trimmed. I didnt glue the tail onto the boom so you'll need to do that after adjustments. My solder job for the tail motor wire isnt that great either. But either way it still works.
Also, there is a bunch of extra screws, a new main motor that needs the lead soldered on, a good tail motor, a set of main blades that are used but still good, 2 metal heads (1 shaft is bent but the heads are good, and 2 flybars that are slightly bent.
As you can see I'm not lying about spending that much money on this. I just need $$$ to get my Gaui. Since I dont have any trader feedback you can look up my email on eBay and find my username Evonicx1. I have over 240+ 100% flawless feedback. I am asking $200obo shipped USPS Priority to the US. I only take Paypal and your address must be confirmed. PM me or email me at liqrsicc@aol.com
Thanks,
Erick
Walkera 4#3B complete with everything it came with and original packaging. Now here area all the new parts I have for it:
2 sets main rotor blades
tail boom
main motor (long can)
tail gear
tail rotor blade
4#3 main gear
4#3b main gear
bearings
linkage sets
Now for the upgrades:
MIA g10 flex frame set
MIA tuff skids
MIA hardware kit
NEW MIA antenna and battery mount kit
NEW MIA 32 AWG wire
NEW MIA canopy
10 brand new o-rings
MIA main blade spacers
MIA red anodized collar w/orings
MIA deluxe flybar stabilizer kit
10 new orings
2 NEW rchobbyhelicopter 3.7v 500mah lipos
t-bitz heatsink
You also get whatever came in the box of the 4#3 including the radio, charger and batteries(total of 2 batts) of course. There is also some sim cord or trainer cord included. Also the original canopy.
Now on the heli itself I have installed the heat sink, MIA flybar stabilizer, MIA metal collar, and the MIA direct drive tail.
Bad news? Not really. It'll need to be trimmed. I didnt glue the tail onto the boom so you'll need to do that after adjustments. My solder job for the tail motor wire isnt that great either. But either way it still works.
Also, there is a bunch of extra screws, a new main motor that needs the lead soldered on, a good tail motor, a set of main blades that are used but still good, 2 metal heads (1 shaft is bent but the heads are good, and 2 flybars that are slightly bent.
As you can see I'm not lying about spending that much money on this. I just need $$$ to get my Gaui. Since I dont have any trader feedback you can look up my email on eBay and find my username Evonicx1. I have over 240+ 100% flawless feedback. I am asking $200obo shipped USPS Priority to the US. I only take Paypal and your address must be confirmed. PM me or email me at liqrsicc@aol.com
Thanks,
Erick