Trade 600e for something alittle smaller, feeler

[CagedVR6]

Ok im thinking this may be too much of a bird for me, but maybe ill get used to the size, so this is just a feeler.

I wouldnt mind say a 500e, or a 30 sized nitro as a swap.

This is WayneBrowns old bird and it has never met the ground "never been crashed.

What you would get.

-600e kit (600XL Brushless motor, REC-B3X External BEC, 5.1V Step-Down Voltage Regulator, Li-Polymer 7.4V 1900mAh 12C For BEC)
-Aftermarket ESC (Hobbywing 80A) http://www.helidirect.com/product_info.php?cPath=45_434&products_id=4392
-SAB CF blades, Align CF tail blades (has small chip in the tail blades, could use new ones)
- Have an outrage 6c pack as well or FlightPower your choice.

I would most likly be keeping my servos and gyro

Like i said this is just a feeler, i could change my mind 5 min from now, ive been know to do that :dontknow

Im not interested in money, just swaps. Also i dont want junk so dont waste your time.

I have plenty of feedback (115) on ebay.

If you have something to offer, please include pictures.

http://i46.photobucket.com/albums/f138/drel83/DSC00679.jpg
http://i46.photobucket.com/albums/f138/drel83/DSC00666.jpg
http://i46.photobucket.com/albums/f138/drel83/DSC00643.jpg

[aashu]

If you like a mint 450 I am selling.. we could discuss..

[CagedVR6]

how about some info what's included? pics?

[aashu]

Like you asked, its no junk and I was primarily looking to sell but saw your post and thought of giving it a try

- Trex 450 SE V2 with align CF blades and align painted canopy has some scratches
I will include another new canopy . Scratched canopy id from using it on a shogun
- Original Align heli case.
- 430 xl motor and esc
- 1 - Thunder power 2100 prolites
- 1 - Thunder power 2200 extreme
Will inlcude an EP1400 but not sure how good it is.
- Gy401 gyro
- JR 3400g tail servo
- 3 - hitec 65 metal gear cyclic servos
- Spare set of align CF blades New in box
- A few spare parts like tail boom, main gear, landing gear, frame,
flybar, linkage rods etc.
- True blood dampeners
- Align pinions

The Heli is in MINT condition just like you would buy it new.
Photos here
http://www.flickr.com/photos/28302637@N04/


DO U Have a YAHOO IM we could chat ?

[Chez143]

I also have a Trex 450 se v1.5 but it is a little more custom. i will post pics tomorrow morning. LOTS OF SPARES & BATTERIES! It is set up right now with an Askman AP mount, which i could include is you are interested in that, or I could put the yellow gorilla gear landing gear back on.

[CagedVR6]

Like you asked, its no junk and I was primarily looking to sell but saw your post and thought of giving it a try

- Trex 450 SE V2 with align CF blades and align painted canopy has some scratches
I will include another new canopy . Scratched canopy id from using it on a shogun
- Original Align heli case.
- 430 xl motor and esc
- 1 - Thunder power 2100 prolites
- 1 - Thunder power 2200 extreme
Will inlcude an EP1400 but not sure how good it is.
- Gy401 gyro
- JR 3400g tail servo
- 3 - hitec 65 metal gear cyclic servos
- Spare set of align CF blades New in box
- A few spare parts like tail boom, main gear, landing gear, frame,
flybar, linkage rods etc.
- True blood dampeners
- Align pinions

The Heli is in MINT condition just like you would buy it new.
Photos here
http://www.flickr.com/photos/28302637@N04/


DO U Have a YAHOO IM we could chat ?
If you would include all cyclic servos, 401, tail servo, batts and what not i would prob swap with you. But rember with my chopper im not including any servos or gyro, dont want any confusion. No Yahoo just AIM.
How many flights on those LiPo's?

[aashu]

Batteries are more than a year old but are not used much hold full charge and easily provide 7-8 minutes of flying. I can give you everything but gyro (will include tail servo) if you would keep yr gyro.
Can you PM me exactly what are you offering from yr side ?

Thanks

[CagedVR6]

Thanks to all those who inquired, but shes gone to a new home now.:cheers