What spacers should I use with my tail blades?

[Sprocket]

Any idea what spacers I should use with the tail blades on my Stratus? I have 105mm v's and if i dont use a spacer it really pinches the tail rotor grip. Unless I missed it the instructions dont specify which ones to use. Any help would be greatly appriciated.

[freddyferris]

1,5mm spacers

fred

[DavidH]

The tail grip width is 8mm
The V blade tail blade root is 5mm
As Fred mentioned above, you will need 1.5 mm on each side of blade.


David

[WayneBrown]

RHR carries the spacers, but you could make your own if you have the sheet material and a roto-broach.
One set has lasted me a long time..

[Sprocket]

cool thanks guys. I found some old washers that work perfect!

[Mille aka Fredrik]

NHP blades comes with spacers that fit.