Tail hunts during tail-down funnels....SOLVED

[Mille aka Fredrik]

Well, the tail on my Stratus starts to hunt a bit when I do tail-down funnels. But not in inverted funnels. (counterclockwise) It aslo will hunt little in fast tic-tocs.
I'm using closed gearbox (FAI) and GY601 with 37% gain. SAB 106mm tailblades and headspeed @ 1850. The gearmesh is good in the T/R box and at the crowngear.

Other than that, the heli flies great!

Anyone have a clue of what it could be?

[Mille aka Fredrik]

Problem solved :D

[capebob]

Well, give us a hint as to what the problem was.

Bob

[Mille aka Fredrik]

Forgot to set the mechanical mesh in the norm mode :roll:

[Zilly]

I don't understand, what has gear mesh got to do with hunting?

z

[Zilly]

I don't understand, what has gear mesh got to do with hunting?

z

[DanW]

If the gear meash was out it would be out in HH as well. There's no way to change it between modes. Might try to explain it a little clearer so we can understand. :?:


Thanks
Dan

[Mille aka Fredrik]

Not gear mesh :wink:

Adjust the length of the rod to the T/R so there were no drifting in normal mode.
Have I explained my self better now?

[Zilly]

Not really :D

[flyinfool]

I think it's a language thing.
What I think he meant is that he adjusted the tail linkage and/or servo to work properly in normal mode and that solved the problem in HH.

[Zilly]

Thanks Jeff however I was joking I got it!!

[flyinfool]

:oops: