Alpha_&_Omega
07-25-2008, 07:10 PM
, selling off the b-rex and going to a full t-rex 450 v2. I have plenty of parts and pics to come. Taking offers. All of the t-rex parts are brand new and sealed.
T-rex 450 V2:
Head and tail assemblies complete untouched and still factory sealed in their bags. You will need a fly bar.
Factory sealed motor and esc never used. (I will solder them together correctly upon request)
B 400 Parts:
2 complete tail assemblies
2 stock motors
7 unused feathering shafts
3 unused main shafts
2 ½ hardware bags
1 two pack of unused tail booms
1 undamaged tail boom
2 tail belts
1 stock esc
2 air frames with all bearings
2 sets of landing gear
Bagged set of landing skids
2 pair of balanced wooden blades
1 pair of not flown, but balances carbon fiber blades
1 bagged canopy
2 canopies with several flights
2 ½ tail boom supports
7 vertical tail stabilizers
4 horizontal tail stabilizers
4 sets of tail fins
2 air frames modified to fit hs-65 mg cyclic servos
2 complete head assemblies w/main shafts.
Ball and linkage sets
2 blade caddies
Plenty of other internals and gearing just ask
If you have servos and a receiver, you should be able to get at least one working heli out of this lots and have plenty of spare parts if you crash.
I can throw in an extra bec and stock esc… they may be fried, but they are worth a shot
I do have a 110 gyro that I was saving for another project. I may be convinced to add it in if need be. Paypal only all sales final, unless I mess up.
T-rex 450 V2:
Head and tail assemblies complete untouched and still factory sealed in their bags. You will need a fly bar.
Factory sealed motor and esc never used. (I will solder them together correctly upon request)
B 400 Parts:
2 complete tail assemblies
2 stock motors
7 unused feathering shafts
3 unused main shafts
2 ½ hardware bags
1 two pack of unused tail booms
1 undamaged tail boom
2 tail belts
1 stock esc
2 air frames with all bearings
2 sets of landing gear
Bagged set of landing skids
2 pair of balanced wooden blades
1 pair of not flown, but balances carbon fiber blades
1 bagged canopy
2 canopies with several flights
2 ½ tail boom supports
7 vertical tail stabilizers
4 horizontal tail stabilizers
4 sets of tail fins
2 air frames modified to fit hs-65 mg cyclic servos
2 complete head assemblies w/main shafts.
Ball and linkage sets
2 blade caddies
Plenty of other internals and gearing just ask
If you have servos and a receiver, you should be able to get at least one working heli out of this lots and have plenty of spare parts if you crash.
I can throw in an extra bec and stock esc… they may be fried, but they are worth a shot
I do have a 110 gyro that I was saving for another project. I may be convinced to add it in if need be. Paypal only all sales final, unless I mess up.