Raptor E550 setup/ equipment recommendations

[cloudshaker]

Just got a Raptor E550, and I was wondering what everyone is using for equipment
servos, gyro,ESC,BEC. It has the ripper motor on it.

Thanks for any help. CS

[rotorhead58d]

Just got a Raptor E550, and I was wondering what everyone is using for equipment
servos, gyro,ESC,BEC. It has the ripper motor on it.

Thanks for any help. CS

futaba 9252 X 3
GY 401/9254
stock esc on gov mode
align 3 amp bec
rotortech 550 mm blades

works great

[xjr1300]

Hi!

E550 with OBL 43/11 and speed control BLC75 (non-gov),
3 x Spektrum DS821 for swash,
Spektrum AR7000,
Futaba GY401 + 9254,
Sanyo KR1700 NiCad receiver battery pack,
Kokam H5 6s 4000 mAh
9 teeth pinion
airtec Masterblad HQ 564 mm

Only 10 flights until now, works fine for 7 minutes scale-like cruising :YeaBaby:

[GatoVolador]

E550 kit
MVP metal head block
MVP seesaw w/ head button
QuickUK metal washout base
Metal pitch slider
SUS tail rotor shaft
JR 8717s on cyclic
Hyperion DS20GMD tail servo
Spartan DS760 gyro
AR7000 rx
Align 6A BEC
FlightPower 2S 2100mA flight pack
10S A123 main packs
Z-Power Z50A-800 w/ 11 tooth pinion
CC Phoenix HV85 ESC