CoronaL
07-29-2008, 10:44 PM
I bought this as a backup motor this spring. It had been sitting for a few months and I was bored so I replaced the rear bearing with a new RC bearings stainless steel bearing. Will include the stock rear bearing and a new front bearing. The stock bearing looked fine, I just wanted something to do, and after reading about the bearing issues with storage I was paranoid so I just did it.
I never needed to use it, and was told it has less than a gallon of use on it.
MP5 is like new as well. Has a small clearance in the bottom weld for frame clearance from the guy I bought it from. You cannot see it once mounted.
Both will come in retail boxes
$200 plus shipping for the combo
http://www.helifreak.com/attachment.php?attachmentid=56950&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56951&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56952&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56953&stc=1&d=1217385826
I never needed to use it, and was told it has less than a gallon of use on it.
MP5 is like new as well. Has a small clearance in the bottom weld for frame clearance from the guy I bought it from. You cannot see it once mounted.
Both will come in retail boxes
$200 plus shipping for the combo
http://www.helifreak.com/attachment.php?attachmentid=56950&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56951&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56952&stc=1&d=1217385826
http://www.helifreak.com/attachment.php?attachmentid=56953&stc=1&d=1217385826