More Binding...

[Ollie West]

Just checking my pitch on my Swift 550 Carbon and I dont have enough as what I wanted, so increased the range and adjusted the head link for tracking and i'm getting some binding. Its stopping the swash moving correctly when at bottom stick, and shows up as a tiny bit of play on the head as a result.

Located where the problem is too, and its on the section where the servos linkages join the the triangle shapped plastic and the ball link that connects the linkages the goes to the swash is hitting the CF frame. Heres a pic of the area.

CLICK TO ENLARGE

http://i65.photobucket.com/albums/h213/Ollie_West/th_BindingArea.jpg (http://i65.photobucket.com/albums/h213/Ollie_West/BindingArea.jpg)

Before I go sanding away my frames, has anyone encounterd this problem, or has found an error?

Ollie ;)

[grwarlock]

Better double check every thing as I have (-11 0 +11) with no binding in sight. Check bobs video at the top of this forum to see if you might have missed some thing.

[Ollie West]

Fixed it :) , missed out the spacer in the A arm. Now its fine being further away from the frame.

Ollie ;)

[grwarlock]

Awsome, glad you found it before you broke the chain saw and chizzles.