Fast/Slow wiggle

[Michaf@mac.com]

After a crash I'm getting a strange behavior on my 401GY. When I set the sensitivity to 85% it wiggles, obviously, but then when I set it to 60%, it still wiggle but slower and with a larger amplitude...

I've crashed my Blade400 a couple of times, I know the setup fairly well, all that's mechanical around the gyro seems fine.

Any help appreciated

[Michaf@mac.com]

Ok, I found it. The tail rotor wasn't mounted properly causing the the servo to work much too hard. This guy told me this trick to check and it's been really helpful. Remove the main blades, unscrew the the stick from the servo to the tail rotor system and hold it while revving up. Try moving it and feel how hard it is. If really too hard you've got a problem.

Hope this will help others.