How long is the carbon 0868-11 t/r push rod?

[Mille aka Fredrik]

Just put on my open T/R on the Stratus and need to change the t/r push rod. (Had the closed one before)
Have a leftover push rod that is to long. So my question is how long it is. In millimeters thanks :wink:

[DavidH]

Changing from the closed CNC tail box to the Open geared style tail box. Requires the pushrod that is on the boom to be lengthened 10 millimeters.
I believe the actual carbon rod is same length. The threaded studs in each end are just installed 5 mm less on each end than for the closed box.
If you have a carbon rod, then just make it 10 millimeter longer and install the studs according to the instructions.

David

[Mille aka Fredrik]

Thanks for the info David!