View Full Version : Flybar carrier
Rada70
12-13-2005, 09:36 PM
I need the 2 bearings for the flybar carrier. Does anyone know the Item#. Thanks
DavidH
12-14-2005, 09:15 AM
0299 Ball Bearing M4 X10
David
Rada70
12-14-2005, 12:27 PM
Great, Thanks David
Rada70
12-16-2005, 11:23 AM
David, I forgot to mention it's for the new fly bar carrier. The 0299 did not work.
DavidH
12-16-2005, 11:38 AM
Yeah I was thinking that might be what it was for after I posted the part numbers above.
I am not positive what bearing it is in the new flybar carrier. But from looking at mine without taking it apart. I would think it is
0283 Flanged Ball Bearing 6MM X 10mm
That is the one it looks like to me without taking apart the carrier and measuring it.
David
Rada70
12-16-2005, 08:24 PM
Ok, I'll try that. thanks Dave
DavidH
12-17-2005, 08:17 AM
If you have the carrier apart. Just measure and check the dimensions.
You will need to measure the outer diameter of the end that goes in the inside race of the bearing. This would be the piece that goes over the flybar on each end. Then you would need to measure the inside diameter of the carrier where the bearing is placed.
I am pretty sure it is a flanged bearing.
David
Rada70
12-17-2005, 10:01 AM
MY friend Dino from east coast extreme helis came by my job. He had item #0283. It is the right number for the flybar carrier. You're right it's the flanged bearing. thanks again.
Jerry
12-17-2005, 10:03 AM
Glad you got it sorted out Ali. The 0283 does both the flybar carrier - and the seesaw pivots.
Jerry
Rada70
12-17-2005, 05:52 PM
Hi Jerry, Good to hear from you. How do you like the 14MZ update?