View Full Version : Fury Extreme Main Axle
RPM 1.5
12-16-2005, 07:49 PM
Do you really need the silicone tubing # 0316 when replacing new axle,had dirt nap and I'm changing new axle and one peice damperners
Ray :arggg:
ChrisLaFollette
12-16-2005, 08:06 PM
No. Its not NEEDED.
wattybotts
12-16-2005, 10:06 PM
Wassup Ray Ray
What dampeners are you using? I have flown it with and without the fuel tubing and I couldnt tell a difference.
Now, if you wanna go BIG and get the 1 piece dampeners, you will not need the fuel tubing at all.
Good luck on the rebuild,
RPM 1.5
12-16-2005, 10:24 PM
Thanks Sceadu50dude
Hey Bobby
I want to be as HUGE AS YOU ONE DAY,so I have new 1 piece dampeners in HE HE HE HE ,did not put tubing over axle putting back now,New flybar carrier HE HE HE !!!!!!!!!!!! had to cut off ,new one going in now had extra one
Thanks
Ray :arggg: :arggg: :noteworthy
DavidH
12-17-2005, 08:02 AM
The tubing in the middle of the blade axle is beneficial and does have a purpose.
The tubing is there as a pivot point for the axle and to keep the dampeners from carrying all the load. It will do the job where it is two piece or one piece dampeners. The metal head block originally was machined so that the tubing was not needed. The block was machined so that it had a built in pivot point. The design was changed a few months after the head block was introduced.
David