Config initial.

[enry74hh]

Hi,

I purchased Logo6003D V-stabi with the following setup:

-Kokam 10S 4000
-Orbit 30-12HE
-Phoenix 85 HV

-3x JR8717 @ 6V
-1x BLS 251

-Rx Futaba R6014FS

For the first flights, what setup V-Stabi can I get started?
I try a setup for flight 3D average level;

Thank you.
Enrico.

[uragano47812]

Before you have to do your personal basic setup: setting the servos, swashplate, sensor directions, limits ecc.

Before you can download the lastest vstabi software from vstabi.de and with the software connected check if your firmware is updated.

After start with the basic setup. Now with the new software version is very very simple.

After you can go to the field and check for the trims in basic mode.