O.S 91 with Viper head

[Bladefade]

Hi Guys;

Was wondering if I am the only guy out here thats in need of a specialized tool for removing/inspecting the second plug on these twin plug viper heads.... Its in a MA Tempest.
Its almost impossible to remove in the machine.
Any ideas where I might find such a tool????

Regards; DW :shock:

[Robert Johns]

Here is the tool we use to remove the Primary (angled) plug.

http://www.helifreak.com/album_mod/upload/ae161e3923590e2f448d7ac180a4d6fe.jpg

You can get this setup from Sears; about $8.00 for the Flexi handle and about $9.00 for the socket. The swivel socket is 5/16 and thin-walled in order to fit the plug cavity in the Viperhead.

-robert

[Bladefade]

Hey Robert;
Thanks eh............ I think my problem was that I thought there might have been a factory tool available!!!
:oops:

Regards Dale;

[DavidH]

Here is what I use. It works great and is a ratchet. I have 5/16/ 8mm socket on it.

http://www.chapmanmfg.com/images/ratchet.jpg

This is the kit the above ratchet came out of.
http://www.chapmanmfg.com/images/k1068.jpg

I believe Sears carries the same type as above. You can order if from Chapman also.

David