6s on plastic frame

[kahn10]

don't be so stupid.of course ya can't.idiots........
this is clearly a hallucination clowns........

http://www.helifreak.com/attachment.php?attachmentid=60147&d=1219494492

obviously you can't handle your drugs.....luckily for you we're having an amnesty
please send any and all remaining mind altering substances to *** ***** **,*******,**,nz
(if possible could they be vacuum sealed or packed in coffee grounds cause er....just cause)

much appricieated i mean hope you learned your lesson

marco:smokin:

[Graeme67]

Hey Marco, I tried Flinto's 6S 3000mah Outrage pack on mine & it fits like a glove!!

Cheers
Graeme

[Mikej]

Does the canopy still fit ??

[kahn10]

yeah bro......doesn't hurt to (assuming you've got 600 or raptor legs) move the tab mount hole as far forward on the skid as possible and move the bottom tab forwards

[kahn10]

yeah bro......doesn't hurt to (assuming you've got 600 or raptor legs) move the tab mount hole as far forward on the skid as possible and move the bottom tab forwards

[rotorhead58d]

holy double post batman:D

[kahn10]

holy whole hole......and i was a double post virgin.now where's that amnesty bag stashed......i mean securely contained:smokin:
marco

[JaggedEdge]

+1. Ran 6s 3200 on plastic frames for a few flights. Extended lower canopy mount.

Click images for larger view:
http://helifreak.com/picture.php?pictureid=6122&albumid=830&dl=1217221240&thumb=1 (http://helifreak.com/picture.php?albumid=830&pictureid=6122) http://helifreak.com/picture.php?pictureid=6142&albumid=830&dl=1217221240&thumb=1 (http://helifreak.com/picture.php?albumid=830&pictureid=6142) http://helifreak.com/picture.php?pictureid=6140&albumid=830&dl=1217221240&thumb=1 (http://helifreak.com/picture.php?albumid=830&pictureid=6140)

[kahn10]

ha yeah bro......think i used my Y lead twice.then turned it into a why lead.....
it works way better:smokin:

[Navajo31]

6S 3300 here as well.
standard skids, but small mod to the lower canopy holder using some alu.
Makes the canopy tilt up a bit.
Works well.
Added some protection to the batt against chafing by the tiewrap.
Stuck some self adhesive rubber on the frame to keep the bat from moving.
ESC needs to be put horizontally like marco's.
Have fun!

http://www.helifreak.com/attachment.php?attachmentid=59371&d=1219010310
http://www.helifreak.com/attachment.php?attachmentid=59367&d=1219010175http://www.helifreak.com/attachment.php?attachmentid=59369&d=1219010175

[Aussie_G]

Here ya go...

http://www.helifreak.com/showthread.php?t=88228