ION-X and JR10X

[boltz]

In the CCPM120 setup, when I get the pitch stick to move the swashplate up, the aileron and elevator are backward.
If I change direction on either of these two the 120 mix falls apart and the swash goes thru all sorts of contortions. Same thing if I change both simultaneously.
If I change direction on only the pitch, which is Aux1, the aileron and elevator are operating in the right manner but of course the pitch stick screws the swashplate movement up just as the aileron and elevator do when the pitch is the right direction.
I've tried all sorts of combinations but nothing works.
Yes, the radio is set on 120 CCPM. I know it's got something to do with the mix but I can't figure it out.

[boltz]

Well, I guess I'll answer my own question in hope it will help someone else. I figured at this point there wasn't anything to lose so I went against the MA instruction manual which said to leave the swash mixing values at +60. This turned out to be the solution. I changed the pitch value to a -60, leaving the other two at +60 and everything works as it should now. :arggg:

[WillJames]

Thanks for sharing the info boltz, glad you got it sorted out. :)

[JSTAGE]

thanks for the info that helps me out a lot I was puzzled to