Fury part number needed**Thanks Got it**

[cdrking]

I need the part number for both halves of the Fury Extreme fan shroud. Is it just one number or is there a part number for each half.

Thanks,

Jeff

[Scrub]

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA0548-5

[cdrking]

Thanks Scrub,

I used to work out of Concord Airport. Lived in Walnut Creek.

Jeff

[WayneBrown]

0548-5
They come as a set I believe, only 1 number.

[vitek]

Jeff, I've got a set laying around if you want them.

[cdrking]

Thanks for the help. I was bidding on the shroud on E-bay and wanted to compare a new price. I didn't get the item.

Travis,

I may take you up on the offer. The shroud that I have is starting to strip the screw holes. Must be all that crashing, not really.

I may pick them up this spring or summer from you. I don't really need it right now.

Thanks,

Jeff

[DavidH]

I may take you up on the offer. The shroud that I have is starting to strip the screw holes

I have always installed these in my fan shrouds. Works great and never have to worry about the hole stripping are becoming to large. These are the static tracking inserts that use to be installed in the plastic head blocks. They accept a 3mm threaded bolt. Have used these in my fan shrouds for several years now. Even a brand new shroud I install them in the holes.

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA0563-1
David

[cdrking]

So David you use a regular 3mm allen head bolt? That looks like a great idea.

Thanks,

Jeff

[DavidH]

Yes, a 3MM X 10M allen head bolt. I have been the inserts in the fan shroud for several years now.Takes only a couple mins to install them. Just drill larger hole in fan shroud bolt hole. Then screw insert onto end of 3mm bolt. Tap into place with hammer.

David

[cdrking]

Ok thanks, I think I'll try them.

Jeff