6600RPM
09-06-2008, 10:51 AM
Hi Guys!
I use a Bantam BC6 charger with an Align style e-station balance tap connector to charge all of my Align and Air Thunder lipo batteries. I recently purchased two Align 22.2 V 2600 mAh 25C 6S lipo batteries from GrandRC that have 2 ThunderPower balance connectors. One is a 4-hole connector and the other is a 6-hole connector. These balance tap connectors are incompatible with my Align style e-station balance tap. I am unfamiliar with these new taps and would appreciate your advice.
Do you know what e-station balance tap is correct for this new Align 6S battery? I don't see one on the RCAccessory webpage that looks right. I assume that I need to plug both of the balance connectors into the appropriate e-station strip as well as connect the red and black battery leads to the red and black leads from the BC6 as I normally do.
Thanks
I use a Bantam BC6 charger with an Align style e-station balance tap connector to charge all of my Align and Air Thunder lipo batteries. I recently purchased two Align 22.2 V 2600 mAh 25C 6S lipo batteries from GrandRC that have 2 ThunderPower balance connectors. One is a 4-hole connector and the other is a 6-hole connector. These balance tap connectors are incompatible with my Align style e-station balance tap. I am unfamiliar with these new taps and would appreciate your advice.
Do you know what e-station balance tap is correct for this new Align 6S battery? I don't see one on the RCAccessory webpage that looks right. I assume that I need to plug both of the balance connectors into the appropriate e-station strip as well as connect the red and black battery leads to the red and black leads from the BC6 as I normally do.
Thanks