freddyferris
02-06-2006, 02:49 PM
How do I remove them?!
Fred
Peter
02-06-2006, 04:45 PM
drive em out with a 1.5mm hex driver ...
freddyferris
02-06-2006, 04:46 PM
i'll try that thanks!
Fred
DavidH
02-06-2006, 06:32 PM
You can use a 1.5 mm hex driver. But it will need to be one that the shaft is the same diameter as the tip the full length.
MA uses a small drift punch to drive the pins in and out of the tail gears. It looks like a 1.5 mm driver without the hex on end of shaft.
David