mcx wont bind to tx anymore!

[perry59]

I've got a couple issues with the mcx for another thread, but for now this is critical!
I tried my DX7 with the mcx and was still disappointed with its behavior. After binding with my DX7 it seems the mcx will no longer bind with its "stock" Tx no matter what I do!
HELP!
did the norm, turn on Tx, plug in power to mcx, flashing light...
turn off Tx, plug in power to mcx, flashing light...
et cetera, et cetera
what do I do????

[capebob]

I believe the correct sequence is: with transmitter off, power up the heli. Then with flashing light turn on transmitter.

Your mCX should work perfectly with your DX-7 if you have put it on a separate model in airplane mode with all parameters default.

Bob

[shaggybirdman]

I believe the correct sequence is: with transmitter off, power up the heli. Then with flashing light turn on transmitter.

Your mCX should work perfectly with your DX-7 if you have put it on a separate model in airplane mode with all parameters default.

Bob

yup heli first. wait 5 sec for blinking light. hold button back of radio, and power on the dx7. wait for heli to stop blinking.

stock radio

you did push the left stick down, and hold it down, AND here/feel the click then turn on the radio? then wait for the heli to stop flashing. the directions for binding is on the battery cover for the stock radio.

[perry59]

stock radio

you did push the left stick down, and hold it down, AND here/feel the click then turn on the radio? then wait for the heli to stop flashing. the directions for binding is on the battery cover for the stock radio.

DUH:oops:
Guess I should READ the directions before asking for directions !
thanks

[reALIGNed]

don't feel bad, I did the same thing..........twice:arggg:

[shaggybirdman]

yup. i do think it would be a easy mistake.