News - Align T-Rex100S Super Combo

As it has already been reported about quite a bit on the forum, here we will take a look at additional information released by Align.


T-REX 100S Super Combo KX022005



Features:
●Utilizes AFHDS 2.4Ghz frequency hopping technology for interference avoidance and stability.
●Radio transmitter consist of computer simulator output compatible with 3rd party R/C airplane and helicopter simulation software, and includes an adapter cable for computer simulator.
●Supports MODE 1/MODE 2/ MODE 3 controller modes.
●Design encompasses both agility and stability characteristics.
●Utilizes hobby grade micro servos and reinforced frame design for flight stability, crash sustainability, and longevity.
●NiMh/Lipo battery charging capability, capable of charging while flying.
●Convenient USB charge port, allowing PC USB port or any portable 5v USB power adapters to be used for charging the transmitter NiMH battery.
●Charging status and power capacity display.
●Blue backlit LCD display panel.
●5-in-1 electronics board consisting of receiver, ESC, headinglock gyro, servos, and mixing functions.

Specs:
●Length:202mm
●Height:82mm
●Main Rotor Diameter:192mm
●Tail Rotor Diameter:36mm
●Weight(w/o power system):27.8g
●Flying Weight:Approx 32g

Accessories:
● T-REX 100S Kits set x 1
● AT 100 Transmitter x 1
● 1.2V / 1600mAh Ni-MH Chargeable Battery x 4
● 3.7V / 150mAh Li-Polymer Battery x 2
● Simulator Cable x 1
● CD-ROM x 1
● CH100 Lipo Charger x 1
● USB Cable x 1
● Philips Screwdriver x 1