START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar |
Unregistered
|
450 PRO Class Electric Helicopters 450 PRO Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
Topic Review (Newest First) |
10-23-2014 01:51 PM | |||
Pard | Cool. Thanks. Ordered 3 just now! | ||
10-23-2014 01:49 PM | |||
lcc014 |
Quote:
I bought mine from hobbypartz.com, 5 of them. |
||
10-23-2014 01:46 PM | |||
Pard |
Quote:
Where? This is the lowest price I found. http://www.ebay.com/itm/Gens-Ace-120...-/231362866974 |
||
10-23-2014 12:39 PM | |||
lcc014 | After 21% off, it is about $30 a piece. I get my GenAce 1200 mAh, 40C for $22.xx. It is an alternative. | ||
10-23-2014 11:51 AM | |||
Pard |
20% off 6s 1250 pulse batteries http://clubheli.com/ http://clubheli.com/pulse-ultra-6s-2...y-plu45-12506/ |
||
10-13-2014 06:43 PM | |||
xpantz |
Quote:
|
||
10-10-2014 08:10 PM | |||
imagine 50 |
Trex 450L Dominator. Tset Pinnion12t 3800rpm+Crash:
|
||
10-09-2014 11:00 PM | |||
flint723 |
Quote:
Tarot 10t 3.5mm shaft: TL2774 or here Both can be found on ebay as well under different brands. Also Gaui x3 pinons work. |
||
10-09-2014 08:20 AM | |||
dgunawan1 | Which part numbers for 10T or 11T would work for 450 pro dfc? And for Align 460MX? | ||
10-09-2014 07:54 AM | |||
flint723 |
Quote:
|
||
10-08-2014 11:17 PM | |||
dgunawan1 |
I just upgraded my 450 pro dfc to 6S. That means I changed the motor, esc, & lipo. Just "maiden-flew" the bird to get a feel of the rpm vs throttle position. What I found to be interesting is that 3200 rpm is achieved with 52% throttle. I can only imagine the speed if I push to 100% throttle. In my stock 3S configuration, I get to 3200 around 87% throttle. My suspicion is with the new electronics & pinion I'm using. Here's my new setup: Align 460MX, 1800KV KOBY 40LV esc 1300 mAh 6S lipo Stock 12T pinion Anybody with any thoughts on the issue and what can be resolved? |
||
09-14-2014 06:52 AM | |||
skndol |
Quote:
That one or the 460mx from dominator? Is for a 450pro dfc |
||
09-14-2014 06:49 AM | |||
skndol |
Quote:
Which motor do you prefere in a 450? That one or the 460mx from dominator? |
||
06-29-2014 08:41 PM | |||
mhills51 | Here is mine! I finally got it 100% changed over to a stretch with tail blades as well. I do have a issue with the tail. It's not a wag, but a twitch. It is not the gain because when I do a pitch pump the tail is solid. | ||
06-22-2014 07:36 PM | |||
cobieg | I just got Pulse 1350's for the stretched 450 pro. They fit under the canopy. Hope to fly this week. | ||
06-20-2014 03:24 PM | |||
dannym | I am looking for batteries for a 450L, so that's good news. Thanks for the info Willy. | ||
06-19-2014 08:19 PM | |||
Trexwilly | The 1450s I have for my 450L are working great! They are really made for the L though they fit good on the X3 too, they are a bit long for the 450Pro,,, | ||
06-19-2014 08:04 PM | |||
dannym |
Back in January I got some Gens Ace 1200 packs. The packs are working well, but I would like to get some packs that have more runtime. Trexwilly, are the Align 1250 packs still working good? I am considering the Align 1450 Lipos. |
||
06-19-2014 06:05 PM | |||
chan |
Quote:
|
||
06-18-2014 08:25 PM | |||
MarkF |
Try these packs if you want the best performance. http://dinogylipos.com/6-cell-65c/159-5000mah-6s-65c Mark |
||
This thread has more than 20 replies. Click here to review the whole thread. |
Posting Rules |