HeliFreak - Reply to Topic

Additional Options
Miscellaneous Options Automatically parse links in text Automatically retrieve titles from external links

02-11-2014 01:08 AM

Katstrike

I ran into an issue with these settings. The travel at 125% caused a servo issue. The other day ailerons would not respond. Upon further inspection, they were moving but VERY slowly.

I tried a slurry of things, all of witch did not work, until i dropped the travel back down to 100%. Problem fixed and flight returned to normal.

Why would this have caused a problem? is 125% a over limit that should not be used?

01-20-2013 12:16 AM

Dubbin1

Quote:

Originally Posted by linac

Hi Everyone:

Please find attached my current DX6i settings for the mSR. I prefer some mild negative EXPO around the centre of the sticks and I've added some mixing between RUDD->ELEV to try to remove the 5in1's automatic rudder mixing. I'm not a Tx expert but these settings seem to work for me and others will have different setup preferences. If you have any recommendations for me they would be welcome.

Hopefully this will help out those who are less familiar with the DX6i. I would like to thank Elamkin from rcgroups for the programming log template. Thanks.

- Linac

P.S. - Forgot to add - I'm on the advanced swash settings and have extra weight in the canopy for FFF.

Wow you just turned my MSR into a whole new beast. The only thing I had to change was the normal throttle curve. 50 was just not enough to get it off the ground.

I'll be sure to send you the bill for all of the broken parts I am about to experience

01-04-2013 06:22 PM

RichKnapp

lol I have been. I just forgot again today.

01-04-2013 05:13 PM

Pfloyd

Put a heavy blanket over that flatscreen.

01-04-2013 04:14 PM

RichKnapp

[ame]http://www.youtube.com/watch?v=n1iTMp4zVFo[/ame]

01-03-2013 09:53 PM

RichKnapp

I like how its smooth but yet when you want to piro like a witch you can.

No jumping from low rates to high just to piro fast. I like fast piro's but that may be why I go threw the OEM rotor blades in a couple flights. BTW I run a 9958 rotor blade. Don't flex or distort and a little more pitch to it.
Maybe give that a try with my settings. I'll EDIT my list and make that note.

01-03-2013 06:56 PM

Pfloyd

Quote:

Originally Posted by RichKnapp

Heres what I'm running. Got some from others and tweeked to my heli.

MSR ON DX6I, RICH’S SETTINGS
SET UP LIST
MODEL TYPE:
HELI

Model Name:
MSR

REVERSE:
all = NORM

SWASH TYPE:
1SERVO90*

THRO CUT:
POSITION = INH

D/R COMBI
D/R SW = AILE

TIMER
DOWN, 6:00, SW = TRAINER

POWER SETTINGS
B-US 247

CONTRAST
50%

AJUSTING LIST

D/R & EXPO
ALIE: 0 = 100%, +20%
ELIV: 0 = 100%, -1%
RUDD: 0 = 100%, +5

ALIE: 1 = 60%, +5%
ELIV: 1 = 60%, -1%
RUDD: 1 = 80%, +4

TRAVEL ADJ
THRO: v100, ^125
ELIV: v^ both 125
GYRO: v^ both 125
ALIE: v^ both 125
RUDD: V^ BOTH 125
PITC: v^ both 100

SUB TRIM:
ALL 0

GYRO:
SW = GYRO
0: 100
1: 100

THRO CURVE
NORM
0, 20, 40, 60, 80
STUNT
0, 25, 50, 75, 100

PITCH:
LEAVE ALONE

SWASH MIX
INH

MIX 1
THROD >>> RUDD ACT
L: -5% , R: +10%
SW = ON, TRIM: INH

MIX 2 (Helps it fly streight forward and backwards, no slight side ways.)
ELIV >>> AILE ACT
L: -20% , R: +25%
SW = ON, TRIM: INH

REVO MIX
LEAVE ALONE

I like your settings.....

BLADEMSR_IUY (2 min 5 sec)

01-03-2013 04:20 PM

RichKnapp

Heres what I'm running. Got some from others and tweeked to my heli. I also run a 9958 tail rotor blade. Don't flex or distort and a little more pitch to it.

MSR ON DX6I, RICH’S SETTINGS
SET UP LIST
MODEL TYPE:
HELI

Model Name:
MSR

REVERSE:
all = NORM

SWASH TYPE:
1SERVO90*

THRO CUT:
POSITION = INH

D/R COMBI
D/R SW = AILE

TIMER
DOWN, 6:00, SW = TRAINER

POWER SETTINGS
B-US 247

CONTRAST
50%

AJUSTING LIST

D/R & EXPO
ALIE: 0 = 100%, +20%
ELIV: 0 = 100%, -1%
RUDD: 0 = 100%, +5

ALIE: 1 = 60%, +5%
ELIV: 1 = 60%, -1%
RUDD: 1 = 80%, +4

TRAVEL ADJ
THRO: v100, ^125
ELIV: v^ both 125
GYRO: v^ both 125
ALIE: v^ both 125
RUDD: V^ BOTH 125
PITC: v^ both 100

SUB TRIM:
ALL 0

GYRO:
SW = GYRO
0: 100
1: 100

THRO CURVE
NORM
0, 20, 40, 60, 80
STUNT
0, 25, 50, 75, 100

PITCH:
LEAVE ALONE

SWASH MIX
INH

MIX 1
THROD >>> RUDD ACT
L: -5% , R: +10%
SW = ON, TRIM: INH

MIX 2 (Helps it fly streight forward and backwards, no slight side ways.)
ELIV >>> AILE ACT
L: -20% , R: +25%
SW = ON, TRIM: INH

REVO MIX
LEAVE ALONE

01-02-2013 11:30 AM

Pfloyd

I use these setting and I like them alot..very easy to fly around my living room.

Menu Setup :
Model type : héli
Reverse : tout en Normal
Swash type : 1 servo 90°
Thro cut : ACT
D/R combi : ACT; D/R SW -> AILE

Menu Adjust list :
D/R & Expo :
AILE 0 : 100% / +20% | AILE 1 : 55% / +25%
ELEV 0 : 100% / +5 | ELEV 1 : 65% / +20%
RUDD 0 : 100% / +5 | RUDD 1 : 75% / +15%
Travel ADJ : tout à 100% sauf le THRO UP à 110% (monter les gaz pour le régler)
Sub trim : tout à 0
Gyro : -> SW-GYRO ; 0 : 70% | 1 : 100%
Thro cur : NORM : 0-20-45-70-100% ;
STUNT : 0-30-55-80-100% + HOLD à 0%
Pitc cur : celles d'origine droites (0-25-50-75-100%)
Swash mix : INH
Mix 1 : Pour atténuer le fait qu'en translation avant il parte à droite (pas encore le top) : ELEV->AILE ACT | RATE L -20% | RATE R -45% | SW ON | TRIM INH
Mix 2 : Suite réglage pour translations AV : ELEV->RUDD ACT | RATE L 0% | RATE R -10% | SW ON | TRIM INH
Revo mix : NORM et STUNT tout à 0
En vidéo :

Réglages settings Spektrum DX6i + Blade MSR (MSR v1) - MM (2 min 24 sec)

01-02-2013 10:08 AM

RichKnapp

Quote:

Originally Posted by daveapplemotors

Indoors flying:
I played today with Mix 1 and Mix 2
Mix 1
Rudder >> Aileron
L -45 R +15

Mix 2
Rudder >> Elevator
D -5 U -65

How did it work?
I'm running 1 mix.

Thro >>> Rudd
L - 5 , R +10

12-31-2012 06:36 PM

RichKnapp

^5 thanks for the settings. I used them with a little tweeking and did a throdle curve set up threw the F-Mode switch. Flies like a dream.

08-05-2012 03:00 AM

flgfish

Quote:

Originally Posted by linac

Hi Everyone:

For those who have been having trouble viewing my mSR DX6i settings, please find attached a reformatted version of the file. Hopefully this will work better. Thanks and have fun!

-Linac

Feb. 5/11 - Update
The file that was posted here Feb. 4/11 had the mix setting incorrect (the file did not format correctly?). I have amended the file and attached it below.

The file does not display correctly on my iPad, but it is fine using the latest Adobe reader on Windows. My iPad does not appear to display the form values correctly.

06-27-2012 04:54 PM

micropilot

Just noticed trying to fly on gear mode lol ups

06-27-2012 04:18 PM

micropilot

Hi linac

I have set my DX6I as indicated on the PDF file to fly my MSR but I don't seem to have full throttle do you know what I could be doing wrong. Heli is barely coming of the ground I have try stock set up radio and it does fly.

Thanks, Jose

05-07-2012 02:45 PM

daveapplemotors

Indoors flying:
I played today with Mix 1 and Mix 2
Mix 1
Rudder >> Aileron
L -45 R +15

Mix 2
Rudder >> Elevator
D -5 U -65

04-15-2012 02:17 AM

born ready

Guys, I figured it out.

Thanks,
Born Ready

04-14-2012 05:12 PM

born ready

Hi all. I'm trying to change from 'normal" to "stunt" on the throtle curve page.
On page 16 of the manual, it shows a little arrow next to the curve selected.
When I try to select stunt or hold...the arrow doesn't move.
What am I doing wrong?
I'm looking forward to your help.

Born Ready

02-26-2012 02:51 PM

rskoncepts

I have the radio setup per this thread but notice left aileron is a lot faster than right. Servo is centered with trim and link centered. End points are 125. Any suggestions?

02-24-2012 06:22 AM

linac

Quote:

Originally Posted by Derfman

linac we tested your settings and they work great. thanks.

im still a little confused about the DR combi setting. Doesn't this need to be set to FM, in order to switch to flight mode 1?

Hi Derf:

I think this is the first time I have had this question on my settings. My understanding is that the mSR dual rates are controlled by the "gyro" on channel 5 and this is for Spektrum transmitters in heli mode. (See hydro's posting here on DRs: https://www.helifreak.com/showthread...ght=dual+rates).

I'm actually not sure if setting DR combi to the FM switch would make any difference in this case - my guess is probably not (other pilots would have probably identified this long ago if this was an issue). However, we both could try it out and see. I'll have to dust off my mSR and try it!

-linac

02-23-2012 11:03 PM

Derfman

linac we tested your settings and they work great. thanks.

im still a little confused about the DR combi setting. Doesn't this need to be set to FM, in order to switch to flight mode 1?

This thread has more than 20 replies. Click here to review the whole thread.

Register Now

Log-in

Posting Rules
You may post new threads You may post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules