View Single Post
Old 01-03-2012, 02:31 PM   #26
Fastredrover
Registered Users
 

Join Date: Dec 2007
Location: Coffs Harbour Australia
Default

Quote:
Originally Posted by Fastredrover View Post
Hi there.

Having trouble getting hold and throttle cut to work on my CC controlers with fixed RPM gov mode.
I have assigned my hold to the rudder D/R switch but I can not seam to get the throttle cut value for auto bail out to this switch, it stays with the default HOLD switch.
So I have two throttle hold values
You can assign different switches for throttle cut, can not remember what they are but
Rudder D/R is not one
Am I doing some thing wrong or do you guys have a work around.

Thanks In advance.
Worked it out and happy with result.
Just swapped the roles of the two switches by adjusting there values.
Rudder D/R "hold" is set to the auto rotation window of the CC controler.
HOLD switch is set to zero, CC arming.

Use Rudder D/R for auto's, flip back out will give fast spool bail out.
HOLD switch will give ESC arming and from there slow spool up.
This frees up normal F-MOD which was zero throttle as per castle's quick tip video
giving a third head speed if I chose to use it.
__________________
700E V2 800 Stretch,Vbar,KDE everything :700E DFC HV,Vbar,KDE:CC 160edge:550E KDE,Vbar mini,CC 120Edge, Scorp 4025-1100:450Pro 6S:250DFC:2X Mcpx DBL BL
Fastredrover is offline        Reply With Quote