View Single Post
Old 03-28-2012, 01:53 PM   #85
HeliFX
Registered Users
 
Posts: 1,039
Thread Starter Thread Starter
 

Join Date: May 2009
Location: Toronto, Canada
Default

Wanted to correct my first post regarding my Kv test which was not correct due to wrong pole setting on my Kv motor. Should have set half pole count (4) instead of 8

4.5T short @1.5 mm target 1100
esc: Hobbywing 80A
timing set = 15 degrees
pack: 6S


motor #1 = 1070 Kv
motor #2 = 1068 Kv


now its good

Quote:
Originally Posted by HeliFX View Post
I finally had the chance to test out the newly re-wounded 4025.

4.5T short @1.5 mm target 1100
esc: Hobbywing 80A
timing set = 15 degrees
pack: 6S

motor #1 = 553 Kv
motor #2 = 551 Kv
total = 1104 Kv

safe to say I'm good to move on to final phase sealing and glue the motor.
unless someone see something I might have missed
HeliFX is offline        Reply With Quote