I had a previous thread about my setup and I got people complaining about no flight data.
So I went out and got an eagletree elogger v3 with powerpanel and brushless rpm monitor
my setup is as follows
with a revco 10T
8s ( 6s TPeXteme 5000mah + 2s TPeXtreme 5000mah)
CC110HV ( heli fixed endpoints and a 95% flat throttle curve, no govenor)
Kasama tail hub
Vee Blades tst edition blades
Vblade 95mm tail blades
Radix 3mm super stubz paddles (440mm flybar)
611 gyro + s9256 tail servo
s9351 cyclic servos
Headspeed has been matched with optical tach and is correct as best I can tell.
I started with a sustained climbout to medium descent then flew around doing fast forward flight and mild 3d.
Sustained climbout (longer then the first flight around mid flight more forward flight (various orientaiton inverted forward and backward flying), less 3d.
Initial observations from the logs....glad I went with the 110HV instead of the 85. The temperature was around 0 degrees celcius so the batteries will have slightly less power then in the summer months.
I am new to FDR informatin but included what I believe to be pertinent information. I save my logs so if I am missing something you want to see ask and I can provide it. (no temp sensors batteries get warm but not hot, motor and ESC barely warm up at all to the touch).