Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > CB100


CB100 Walkera CB100 Helicopter Support


Reply
 
Thread Tools Display Modes
Old 04-01-2010, 03:10 PM   #1
ting
Registered Users
 

Join Date: Jan 2010
Location: Bangkok, THAILAND
Default Where to find CB100's servo arm??

Dear All,

I would like to have a servo arm to replace the arm of an aileron servo, which been cut short due to canopy interaction.

Could you please point me to a shop that I can order this servo arm?

Thanks,
ting is offline        Reply With Quote
Old 04-01-2010, 03:14 PM   #2
Steve Joblin
Registered Users
 
Posts: 3,860
 
My HF Map location
Join Date: Aug 2008
Location: Blue Bell, PA USA
Default

Unfortunately, you can't just buy the servo arm... you need to buy a new servo. The only way to get just the arm is to ask if anyone has an extra. Someone asked for one a few months ago and I sent him an extra one I had. Maybe someone else has an extra one they are willing to part with?
Steve Joblin is offline        Reply With Quote
Old 04-02-2010, 10:34 AM   #3
ting
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2010
Location: Bangkok, THAILAND
Default

Thanks Steve,
ting is offline        Reply With Quote
Old 04-02-2010, 01:38 PM   #4
ting
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2010
Location: Bangkok, THAILAND
Default

If I can't find the arm....

Can I set the travel adjust of the Elevation and Aileron to 120-150%, Is that help? Any disadvantage?

Thanks.
ting is offline        Reply With Quote
Old 04-02-2010, 03:41 PM   #5
Steve Joblin
Registered Users
 
Posts: 3,860
 
My HF Map location
Join Date: Aug 2008
Location: Blue Bell, PA USA
Default

You won't have the full range of motion of the servo, but if you don't need the full range of motion, and it works for you, then I say "great idea!"
Steve Joblin is offline        Reply With Quote
Old 04-02-2010, 10:47 PM   #6
ting
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2010
Location: Bangkok, THAILAND
Default

Thanks again Steve,
ting is offline        Reply With Quote
Old 04-26-2010, 07:13 AM   #7
mhm1
Registered Users
 

Join Date: Apr 2010
Location: New York
Default

try www.helipal.com. If it's not on the website contact them at technical@helipal.com and they will get back to you, usually within a day. hope that helps.
mhm1 is offline        Reply With Quote
Old 04-27-2010, 11:22 AM   #8
Dusty1000
Registered Users
 
Posts: 2,882
 

Join Date: Sep 2008
Location: Glasgow, U.K.
Default

If you still need a servo arm, send me your address in a pm and I'll stick one in the post.

Dusty
__________________
Blade 400, mSR, mCPX - Sonix SX450SE - Walkera 1#A, 4#3, 4#3A, 4#3B, 4G3
Dusty1000 is offline        Reply With Quote
Old 04-28-2010, 08:05 AM   #9
ting
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2010
Location: Bangkok, THAILAND
Default

Quote:
Originally Posted by Dusty1000 View Post
If you still need a servo arm, send me your address in a pm and I'll stick one in the post.

Dusty
Thanks so much Dusty, I just drop you a PM.
As I said, If there is anyway to save you the mailing cost, please let me know.
ting is offline        Reply With Quote
Old 04-28-2010, 08:05 AM   #10
timewerx
Registered Users
 
Posts: 1,550
 

Join Date: Dec 2009
Location: Manila, Philippines
Default

Hi Ting, May I assume you still have the Walkera 4G6? If you do, just buy a 4G6 servo set and use the servo arms from the servo set.

The servo arm of 4G6 and CB100 is the same and interchangeable. The 4G6 servos have a relatively short life expectancy and fragile in crashes so you'll likely replace them anyway soon and have not wasted any money at all. However, the servo arms are crash proof and likely last a lifetime, so you can use the old servo arms for the new servos.

I used to have the same problem as you but with my 4#3b(which uses the same servo/arms as CB100). I had spare 4G6 servos at that time and used the 'uncut' servo arms from the 4G6 servos into my 4#3b. Both helis are flyable at that time and I simply reused the old servo arms without issues.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

timewerx is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > CB100


CB100 Walkera CB100 Helicopter Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com