Align 500ESP Stock ESC

Alexandre Najar · 06-01-2010, 09:27 PM

Hi everyone,

I am new in this forum and new to gov too. I only set up a futaba gv-1 for my raptor 50 a long time ago. I have some questions about RCE-BL60G governor mode ESC. Is it good? How can I setup my headspeed on it? And throtle curves for normal and Idle 1 and 2? Gov mode for eletrics has the same benefits as for fuel helis? Thanks for all!

Zorgnot · 10-30-2011, 09:28 PM

I'm playing with it right now and different throttle curve settings don't change anything. I would like some clarification before I change esc's

Deet · 10-30-2011, 11:29 PM

The Gov in the Align ESCs is useless don't even bother trying to make it work

GunnyGlow · 10-30-2011, 11:52 PM

http://helifreak.com/showthread.php?t=53304

I think Bob talks about it in the esc setup vid.

nashus2002 · 10-31-2011, 02:21 AM

Quote:

Originally Posted by Deet

The Gov in the Align ESCs is useless don't even bother trying to make it work

+1 i use flat lines 90 and 95 idle2 15Tpinions

GunnyGlow · 10-31-2011, 08:29 AM

Quote:

Originally Posted by nashus2002

+1 i use flat lines 90 and 95 idle2 15Tpinions

A 15T pinion? What motor/kv?

sharpblue4d · 10-31-2011, 12:13 AM

The gov mode is pretty much worthless on the align esc. Works great with a vbar gov or fixed end points.

Matt

Zorgnot · 10-31-2011, 12:50 AM

Thanks guys.

06-01-2010, 09:27 PM	#1
Alexandre Najar Registered Users Join Date: May 2010 Location: Brazil	Align 500ESP Stock ESC Hi everyone, I am new in this forum and new to gov too. I only set up a futaba gv-1 for my raptor 50 a long time ago. I have some questions about RCE-BL60G governor mode ESC. Is it good? How can I setup my headspeed on it? And throtle curves for normal and Idle 1 and 2? Gov mode for eletrics has the same benefits as for fuel helis? Thanks for all!

10-30-2011, 11:29 PM	#3
Deet Registered Users My HF Map location Join Date: Dec 2009 Location: South Australia	The Gov in the Align ESCs is useless don't even bother trying to make it work __________________ Dave Goblin 500, Vbar, BLS153, BLS251, Kontronic Jive & Piro MutliWiiCopter Scarab Stealth Armour, Scarab TriiKopta, Scarab Octa, Scarab Vampire

10-31-2011, 12:13 AM	#7
sharpblue4d Registered Users Join Date: Apr 2011 Location: Ga	The gov mode is pretty much worthless on the align esc. Works great with a vbar gov or fixed end points. Matt __________________ Matt

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-30-2011, 09:28 PM	#2
Zorgnot Registered Users Join Date: Dec 2010 Location: California	I'm playing with it right now and different throttle curve settings don't change anything. I would like some clarification before I change esc's

10-30-2011, 11:52 PM	#4
GunnyGlow Registered Users My HF Map location Join Date: Feb 2008 Location: Aurora, CO	http://helifreak.com/showthread.php?t=53304 I think Bob talks about it in the esc setup vid.

10-31-2011, 12:50 AM	#8
Zorgnot Registered Users Join Date: Dec 2010 Location: California	Thanks guys.