Does anyone own the RXR mini titan?

C6 vette · 10-30-2011, 05:57 PM

What servos come with the kit, second will the servos work with a 401 gyro? See below an recommendations will be very helpful.

B335 · 10-30-2011, 07:57 PM

That's what my heli started out as, before I started replacing everything on it.

The RXR (or ARTF, depending on which country you're in) comes with TT Ace C1015 plastic geared servos on the cyclics, and a TT Ace C0915 plastic geared servo on the tail.

Those C1015 cyclic servos are really fragile and will strip in even a minor shunt, and it was cheaper to upgrade to HS65MGs.
The tail C0915 is another story - I'm still using mine, 3 years later.

C6 vette · 11-01-2011, 05:53 PM

Ok, What about the battery any good?

B335 · 11-01-2011, 08:32 PM

Quote:

Originally Posted by C6 vette

Ok, What about the battery any good?

Mine came with an Ace 2200 or 2250 and was a pretty good lipo. Can't guarantee that's what's being given out now, though.

C6 vette · 11-06-2011, 07:29 PM

Ok, what type of tail servo are you using.

B335 · 11-06-2011, 10:01 PM

I'm using the stock C0915 on the tail. Have done for the last 3 years.

C6 vette · 11-01-2011, 05:58 PM

Will the futaba 3114 work?

fakyrr · 11-01-2011, 08:11 PM

I don't recommend the ARF. You'll end up replacing all electronics at some point for various reasons...

C6 vette · 11-01-2011, 08:23 PM

Your right !

B335 · 11-01-2011, 08:31 PM

Quote:

Originally Posted by fakyrr

I don't recommend the ARF. You'll end up replacing all electronics at some point for various reasons...

I agree. If you can, go for the barebones kit, TT4710K10, and then put all the parts you want on it.
With the RXR you're paying for crap parts you'll likely get rid of later anyway (esc, motor, servos, gyro) but the RXR will get you flying cheaply.

10-30-2011, 05:57 PM	#1
C6 vette Registered Users Join Date: Apr 2010 Location: knoxville	Does anyone own the RXR mini titan? What servos come with the kit, second will the servos work with a 401 gyro? See below an recommendations will be very helpful.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-30-2011, 07:57 PM	#2
B335 Join Date: Jan 2010 Location: Gone. Too many assholes here and I am one less.	That's what my heli started out as, before I started replacing everything on it. The RXR (or ARTF, depending on which country you're in) comes with TT Ace C1015 plastic geared servos on the cyclics, and a TT Ace C0915 plastic geared servo on the tail. Those C1015 cyclic servos are really fragile and will strip in even a minor shunt, and it was cheaper to upgrade to HS65MGs. The tail C0915 is another story - I'm still using mine, 3 years later.

11-01-2011, 05:53 PM	#3
C6 vette Registered Users Thread Starter Join Date: Apr 2010 Location: knoxville	Ok, What about the battery any good?

11-06-2011, 07:29 PM	#5
C6 vette Registered Users Thread Starter Join Date: Apr 2010 Location: knoxville	Ok, what type of tail servo are you using.

11-06-2011, 10:01 PM	#6
B335 Join Date: Jan 2010 Location: Gone. Too many assholes here and I am one less.	I'm using the stock C0915 on the tail. Have done for the last 3 years.

11-01-2011, 05:58 PM	#7
C6 vette Registered Users Thread Starter Join Date: Apr 2010 Location: knoxville	Will the futaba 3114 work?

11-01-2011, 08:11 PM	#8
fakyrr Registered Users My HF Map location Join Date: Jun 2008 Location: Paris, France	I don't recommend the ARF. You'll end up replacing all electronics at some point for various reasons...

11-01-2011, 08:23 PM	#9
C6 vette Registered Users Thread Starter Join Date: Apr 2010 Location: knoxville	Your right !