Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > JR and Spektrum Radios and Electronics > 2.4G JR Radios


2.4G JR Radios JR 2.4 Gigahertz Radios and Technology


Reply
 
Thread Tools Display Modes
Old 02-05-2012, 11:59 AM   #1
sje141
Registered Users
 

Join Date: Oct 2008
Default Jr dsx9 and beast x tail gain set up

Hi guys
Have the dsx9 and the new beast ar7200bx. Does anyone now how to adjust the tail gain from the tx. I use to use 2 methods, the flight mode switch or the rudder dual rate but neither work with the new beast.
Beast instructions say to transfer the gyro gain settings to channel 5 gear on the tx. Can't for the life of me find out how to do it
Thanks
sje141 is offline        Reply With Quote
Old 02-10-2012, 03:22 PM   #2
crash-alot
Registered Users
 
Posts: 290
 
My HF Map location
Join Date: Dec 2007
Location: Berkshire, UK
Default

Just plug your tail servo into the rudder channel

On your DSX9 go to system menu, DeviceSEL and assign Gear channel to Rudd D/R or Gear depending which switch you prefer to use when flicking between Rate and heading hold

In you radio you can disable Gyro Sens.
In TRVL ADJ. you use your Gear end points to adjust the gain values. Put both on 50% and go from there.

Good luck
jaco
__________________
Outrage Velocity 50 FBL - OS55 - Align DS610, BeastX + DS650, MGP, Perfect Regulators Igniter Push Button Glow and Flighttech 8A regulator
T-Rex 600NP- OS50 - Align DS620, Spartan + DS650, MGP, SwitchGlo and Ely.Q reg
T-Rex 450SE V2 with CC45 esc
crash-alot is offline        Reply With Quote
Old 02-14-2012, 09:24 PM   #3
godspeed128
Registered Users
 

Join Date: Jul 2007
Location: Tabor City NC
Default

I have a beast x and 9303 I have my gear switch set to switch from head locking to rate but why can't I use the gyro sens to control the gain?
godspeed128 is offline        Reply With Quote
Old 02-15-2012, 07:36 AM   #4
crash-alot
Registered Users
 
Posts: 290
 
My HF Map location
Join Date: Dec 2007
Location: Berkshire, UK
Default

You can flip between HH and rate mode by either using:

1. the Gov menu (Values set in the GOV menu are 1:1 with endpoint values, so the same values you use if using the gear channel) - Set GEAR to GOV in device select menu.

2. Gear end points - Set GEAR to ACT in device select menu.

3. If you want to use the Gyro sense menu then you have to use AUX2 when you plug in you Gyro gain wire. In this case you set AUX2 to AUX2 switch and GYR. You can then use the Gyro Sense Menu.

If you use a governor in your setup. You setup your DSX9 or X9303 as follows:
In Device Select:
GEAR=GEAR SW=GOV
AUX2=AUX2 SW=GYR

On your model you plug in as follows:
Governor lead = Gear channel
Gyro gain lead= Aux2 channel

On your radio the gyro is then controlled via Gyro Sens menu and the Governor is available to control your gov.





Hope that make sense
jaco
__________________
Outrage Velocity 50 FBL - OS55 - Align DS610, BeastX + DS650, MGP, Perfect Regulators Igniter Push Button Glow and Flighttech 8A regulator
T-Rex 600NP- OS50 - Align DS620, Spartan + DS650, MGP, SwitchGlo and Ely.Q reg
T-Rex 450SE V2 with CC45 esc
crash-alot is offline        Reply With Quote
Old 02-15-2012, 09:21 PM   #5
godspeed128
Registered Users
 

Join Date: Jul 2007
Location: Tabor City NC
Default

Well I have the gear set to gear sw and gov and aux2 set to aux2 sw and gyr and the brown gain wire is now in aux 2 I can now use the gyro sens to control my gain but I can't change from rate mode to head holding with the gear sw
godspeed128 is offline        Reply With Quote
Old 02-16-2012, 02:18 AM   #6
crash-alot
Registered Users
 
Posts: 290
 
My HF Map location
Join Date: Dec 2007
Location: Berkshire, UK
Default

Check in your Gyro Sens menu and check which switch its mapped to. Make sure its not INH. Mine is mapped to RUD D/R
__________________
Outrage Velocity 50 FBL - OS55 - Align DS610, BeastX + DS650, MGP, Perfect Regulators Igniter Push Button Glow and Flighttech 8A regulator
T-Rex 600NP- OS50 - Align DS620, Spartan + DS650, MGP, SwitchGlo and Ely.Q reg
T-Rex 450SE V2 with CC45 esc
crash-alot is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > JR and Spektrum Radios and Electronics > 2.4G JR Radios


2.4G JR Radios JR 2.4 Gigahertz Radios and Technology

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com