XG8 + ASSAN GA250 setup

[castorsg]

Hi Guys,

Anyone have setup the ASSAN GA250 gyro using the XG8 TX? I cant seem to get the gyro on setup mode as per its manual.

TX configuration so far:

DEVICE SELECT - FLIGHT MODE: FMOD SW , CH - 7 , DEVICE - AUX2 ,
OUT - GYRO

GYRO SENS - CH: AUX2 , SW: AUX2

However, when flicking the AUX2 switch 3 times, the gyro don't seem to go to setup mode. I think I'm missing something on my setup or I'm doing it incorrectly . Any guidance would be greatly appreciated. Many thanks guys!

[castorsg]

Hi Guys,

I have this solved just after I posted this up. In case someone will need it in the future.

On Gyro Sens, just ensure that position 0 is set to T and position 1 is set to N. you can then flick the switch 3x as per instruction. You should be able to setup your ASSAN GA250 gyro. so far its a breeze.