Trex 250 SE w/all upgraded gear BNF

ttruttmann · 04-04-2012, 05:28 PM

For sale my fully upgraded TREX 250 SE with premium components. Model is BNF with all electronics/gear listed below. In addition I'm including several hundred dollars in spare parts and a great carry case. I'll part it out if I have to, but for a Trex 250 lover this is a great opportunity to get a beautifully built machine and lots of extras. I'd hate to have to tear it down.

Scorpion HK2206-3900Kv motor
Futaba GY520 Gyro
3 x Inolab D201HB servos
JR DS3500G Rudder servo
Spektrum 6100e receiver

Flying Sport carbon fiber pushrod
Flying Sport landing gear
Weighted tail grips
KDE aluminum baseplate
Align carbon 205 main blades

Tons of additional spare parts:
2 x sets Align 205 carbon blades
2 x sets Align 205 plastic blades
5 x Align main drive gear/120 tooth
1 x Align carbon fiber tail boom
4 x Align flybar rod
1 x set of Tail Boom Brace
1 x Flying Hobby kevlar tail belt
1 x Align RCE BL15X (spare)
1 x Align RCM BL250 motor (spare)
5 x Align Main shafts
1 x Paddles
4 x packs of ball links
1 x pack of steel linkage rods
...more parts too...

I'm open to reasonable offers on the above package. I'll pay domestic (U.S.) shipping and accept Paypal. If you have any questions let me know.

Thanks for reading!

ttruttmann · 04-04-2012, 05:31 PM

some pix

Cdmarch · 04-04-2012, 10:35 PM

PM

Sent from my ADR6400L using Tapatalk

ttruttmann · 04-07-2012, 08:03 AM

Thought I had a buyer but it fell through. Gotta loves wives that control the purse strings. Haha

Still available.

ttruttmann · 04-17-2012, 06:51 PM

I'm asking $300 and I'll pay for shipping. Questions or advice are both welcome!

Thanks!

jonbailie · 04-17-2012, 07:16 PM

Do you accept anything other than PayPal?

kruizer7 · 04-20-2012, 09:56 PM

pm sent

fuzzyllamma · 05-05-2012, 09:12 AM

Pm sent

04-04-2012, 05:28 PM	#1
ttruttmann Registered Users My HF Map location Join Date: Feb 2009 Location: Chicago	Trex 250 SE w/all upgraded gear BNF For sale my fully upgraded TREX 250 SE with premium components. Model is BNF with all electronics/gear listed below. In addition I'm including several hundred dollars in spare parts and a great carry case. I'll part it out if I have to, but for a Trex 250 lover this is a great opportunity to get a beautifully built machine and lots of extras. I'd hate to have to tear it down. Scorpion HK2206-3900Kv motor Futaba GY520 Gyro 3 x Inolab D201HB servos JR DS3500G Rudder servo Spektrum 6100e receiver Flying Sport carbon fiber pushrod Flying Sport landing gear Weighted tail grips KDE aluminum baseplate Align carbon 205 main blades Tons of additional spare parts: 2 x sets Align 205 carbon blades 2 x sets Align 205 plastic blades 5 x Align main drive gear/120 tooth 1 x Align carbon fiber tail boom 4 x Align flybar rod 1 x set of Tail Boom Brace 1 x Flying Hobby kevlar tail belt 1 x Align RCE BL15X (spare) 1 x Align RCM BL250 motor (spare) 5 x Align Main shafts 1 x Paddles 4 x packs of ball links 1 x pack of steel linkage rods ...more parts too... I'm open to reasonable offers on the above package. I'll pay domestic (U.S.) shipping and accept Paypal. If you have any questions let me know. Thanks for reading! __________________ TJ - MT 325SE \| DS287mg \| GY401 w/9257 \| Beam Carbon Tail Pushrod - Trex 250se \| D201HB \| GY520 w/3500 \| FS Carbon Tail Pushrod - FBL UH-1 Huey \| Thunder Tiger kit with RJX head & Skookum 720 - Current project - JR 9303 TX Last edited by ttruttmann; 04-17-2012 at 06:49 PM..

04-04-2012, 05:31 PM	#2
ttruttmann Registered Users Thread Starter My HF Map location Join Date: Feb 2009 Location: Chicago	some pix Attached Thumbnails __________________ TJ - MT 325SE \| DS287mg \| GY401 w/9257 \| Beam Carbon Tail Pushrod - Trex 250se \| D201HB \| GY520 w/3500 \| FS Carbon Tail Pushrod - FBL UH-1 Huey \| Thunder Tiger kit with RJX head & Skookum 720 - Current project - JR 9303 TX

04-07-2012, 08:03 AM	#4
ttruttmann Registered Users Thread Starter My HF Map location Join Date: Feb 2009 Location: Chicago	Thought I had a buyer but it fell through. Gotta loves wives that control the purse strings. Haha Still available. __________________ TJ - MT 325SE \| DS287mg \| GY401 w/9257 \| Beam Carbon Tail Pushrod - Trex 250se \| D201HB \| GY520 w/3500 \| FS Carbon Tail Pushrod - FBL UH-1 Huey \| Thunder Tiger kit with RJX head & Skookum 720 - Current project - JR 9303 TX

04-17-2012, 06:51 PM	#5
ttruttmann Registered Users Thread Starter My HF Map location Join Date: Feb 2009 Location: Chicago	Asking $300 I'm asking $300 and I'll pay for shipping. Questions or advice are both welcome! Thanks! __________________ TJ - MT 325SE \| DS287mg \| GY401 w/9257 \| Beam Carbon Tail Pushrod - Trex 250se \| D201HB \| GY520 w/3500 \| FS Carbon Tail Pushrod - FBL UH-1 Huey \| Thunder Tiger kit with RJX head & Skookum 720 - Current project - JR 9303 TX

04-17-2012, 07:16 PM	#6
jonbailie Registered Users Join Date: Sep 2011 Location: Savannah, Georgia	Do you accept anything other than PayPal? __________________ // T-Rex 600EFL Pro 3GX // T-Rex 450 Pro V2 3GX // T-Rex 250 Pro DFC 3GX // // Walkera V120D02-S (x2) // Walkera V120D02 // Walkera Genius CP (x3) // // EFlite Blade MCPX (x2) // EFlite Blade 120SR // E-Sky Belt CPX // // WK2801 // Spektrum DX4e //

04-04-2012, 10:35 PM	#3
Cdmarch Registered Users Join Date: Mar 2012 Location: Herndon VA	PM Sent from my ADR6400L using Tapatalk

04-20-2012, 09:56 PM	#7
kruizer7 Registered Users Join Date: Apr 2008	PM Sent ! pm sent

05-05-2012, 09:12 AM	#8
fuzzyllamma Registered Users Join Date: Dec 2011 Location: canada	Pm sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode