Vbar and Helijive

Joectls · 05-07-2012, 09:18 PM

Guys I have a 520le scorpion motor, the new Helijive and the Vbar. I heard to not use the kontronic Governing the motor and use the Vbar governor insted. Also I heard that I will need a sensor to adapt it on the Vbar . Where I can buy that sensor at?

weedwacker · 05-13-2012, 12:16 PM

Here is the sensor http://www.readyheli.com/MIK4442-Hyp...r_p_38056.html

Looks like we need to run mode 8 on the helijive and use the governor on the vbar.

Joectls · 05-13-2012, 12:58 PM

Thank you Wheedwaker

Weule · 05-14-2012, 04:55 PM

I would NOT try this combo. Mode 8 is certified for Pyro motors only and the "D" wound LE is known bad...

05-07-2012, 09:18 PM	#1
Joectls Registered Users Join Date: Oct 2011 Location: Jacksonville	Vbar and Helijive Guys I have a 520le scorpion motor, the new Helijive and the Vbar. I heard to not use the kontronic Governing the motor and use the Vbar governor insted. Also I heard that I will need a sensor to adapt it on the Vbar . Where I can buy that sensor at? __________________ [SAB Goblin 700] Scorpion4525-520LE • Helijive 120• VBar • JR8917HV / 8900JR Best place to buy : rcgalore.net "No Crash , No Gain" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-13-2012, 12:16 PM	#2
weedwacker Registered Users Join Date: Mar 2009 Location: manhattan	Here is the sensor http://www.readyheli.com/MIK4442-Hyp...r_p_38056.html Looks like we need to run mode 8 on the helijive and use the governor on the vbar. __________________ 7HV \| sz 4926 \| Hyperion Phase sensor \| Helijive 120 \| VBar Fullsize Blue \| Torq HV's Trex 700e 3G \| 700MX \| Ice 120 HV \| WR Hercules \| I2 Tri-Blade Tail\| RotorTech 105's \| Voltz 3300 6s x2 \| Lynx Spindle Bolts

05-13-2012, 12:58 PM	#3
Joectls Registered Users Thread Starter Join Date: Oct 2011 Location: Jacksonville	Thank you Wheedwaker __________________ [SAB Goblin 700] Scorpion4525-520LE • Helijive 120• VBar • JR8917HV / 8900JR Best place to buy : rcgalore.net "No Crash , No Gain" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-14-2012, 04:55 PM	#4
Weule Registered Users My HF Map location Join Date: Sep 2010 Location: Fremont, CA	I would NOT try this combo. Mode 8 is certified for Pyro motors only and the "D" wound LE is known bad...