Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Outrage Fusion 50


Outrage Fusion 50 Outrage Fusion 50 Electric Helicopter Factory Support Forum


Reply
 
Thread Tools Display Modes
Old 05-21-2012, 10:27 PM   #1
nivaldin
Registered Users
 
Posts: 241
 

Join Date: Apr 2012
Location: Brasil, Goiânia/Goiás
Default Swing at 1800 rpm, is right?

what's up guys,

My Fusion is swinging at 1800 rpm, at 2000 rpm is fine.

Someone already tried 1800 rpm or lower?
You guys can try this and tell me if is normal?

Thanks

Last edited by nivaldin; 05-23-2012 at 06:24 AM..
nivaldin is offline        Reply With Quote
Old 05-22-2012, 12:44 AM   #2
Carapau
Registered Users
 
Posts: 1,665
 

Join Date: Jan 2011
Location: North Yorkshire
Default

Im sure it will be fine at 1800. I know a chap who flies his Align 600 at about that head speed, maybe even at 1600. It doesn't make the heli quite so stable in the hover and it slows down the manoeuvrability of the bird otherwise it should work. Personally I would stick to nearer 2000. You can get flights of 6-7 minutes of sport flying at this head speed and the heli comes alive from 2000 rpm.
__________________
Rush 750, Fusion 50, Mini Protos Stretch 6S, Trex 450 Pro 6s, Skyjib 8HL, Jeti DS-16. DX8, Vbar or DJI
Carapau is offline        Reply With Quote
Old 05-22-2012, 06:33 AM   #3
nivaldin
Registered Users
 
Posts: 241
Thread Starter Thread Starter
 

Join Date: Apr 2012
Location: Brasil, Goiânia/Goiás
Default

I think I found the problem. The foam under the mini-vbar was too soft. I just replace it with a more rigid foam and the problem gone.

I did just a little test at home and the swinging disappeared.
But I'll do a test at field later to confirm;

---------
I did a field test, and the shaking/swinging persists

Last edited by nivaldin; 05-22-2012 at 11:58 AM..
nivaldin is offline        Reply With Quote
Old 05-22-2012, 11:38 AM   #4
ke6d
Registered Users
 
Posts: 1,477
 

Join Date: Dec 2006
Location: Milpitas, CA
Default

I ran mine at 1550 rpm before just for the fun of it. It is stable with vbar 5.2. You can hover and fly circuit but that is about it. I was able to fly for more than 10 min on a set of 6S 3000mA packs.
__________________
Current Fleet: TRex-700/500/450/250 Vbar, Logo 600SE/600/500 VBar, Outrage Fusion 50/G5 VBar/FB, Blade mCPx x 2
ke6d is offline        Reply With Quote
Old 05-22-2012, 11:50 AM   #5
Wh1teAfr1can
Registered Users
 
Posts: 2,121
 

Join Date: May 2011
Location: Huntsville, AL
Default

if you have good enough collective management IE Matt Bottos he ran a e6/7 down to 1000 headspeed and was doing piro flips and hurricanes lol
__________________
Richard Zappe
Team Kontronik Team minicopter
Diabolo Kosmik 200, Pyro 750 - 50 Comp, Diabolo S #RZ, Something New (Coming IRCHA 2014)
Wh1teAfr1can is offline        Reply With Quote
Old 05-22-2012, 12:01 PM   #6
nivaldin
Registered Users
 
Posts: 241
Thread Starter Thread Starter
 

Join Date: Apr 2012
Location: Brasil, Goiânia/Goiás
Default

Quote:
Originally Posted by ke6d View Post
I ran mine at 1550 rpm before just for the fun of it. It is stable with vbar 5.2. You can hover and fly circuit but that is about it. I was able to fly for more than 10 min on a set of 6S 3000mA packs.
I'd like to fly at this low rpm too, just for fun as you said.
But at 1800 rpm my fusion 50 is still doing a little shaking/swinging

Some suggestion to solve it?

Thanks
nivaldin is offline        Reply With Quote
Old 05-22-2012, 12:13 PM   #7
JustPlaneChris
Registered Users
 
Posts: 5,237
 
My HF Map location
Join Date: Jul 2006
Location: Austin, TX
Default

Try greasing your spindle shaft / head dampers with silicone grease. If it still shakes, you may need softer dampers for such a low headspeed.
__________________
-Chris
JustPlaneChris is online now        Reply With Quote
Old 05-25-2012, 12:17 PM   #8
poor_red_neck
Registered Users
 
Posts: 3,200
 
My HF Map location
Join Date: Dec 2007
Location: Raleigh, NC - USA
Default

I know It's not a fusion... But I fly my Outrage 550 FBL at 1800 with the red dampners. No shakes, and enough performance for light flips and stuff.

I'm sure a 600 size can handle 1800 just fine and probably perform better.


Sent from my PG86100 using Tapatalk 2
__________________
Blade 130X - Stock
mCPx v1 Brushless Stretch (125mm) - WK10A - 11000kv Inrunner - 550 mah - Full CNC Upgrades
Retired Helis - Outrage 550, Trex 500, Logo 400, Others
poor_red_neck is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Outrage Fusion 50


Outrage Fusion 50 Outrage Fusion 50 Electric Helicopter Factory Support Forum

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com