2 mcpx with zero pitch. yet they fly completely different?!

Thefishtank · 05-27-2012, 06:16 AM

Hey so i recently built up an mcpx with mostly microheli parts minus the main hub and frame.

and ive got another thats all stock ( minus extended boom )

the MH one has lots of negative pitch and barely any positive and the stock has lots of positive pitch but barely any negative...

i put them both to zero pitch...yet this is the outcome.

any idea?

anmatheextreme · 05-27-2012, 06:22 AM

Try adjusting the ATVs or travel adjust on the Tx. Also how do you measure zero pitch? There is a possibility that the swash sit too high/low so you get uneven pitch. Also check pitch curve for linear pitch.

Thefishtank · 05-27-2012, 06:38 AM

the pitch curve is linear, whats the ATVs & travel adjust?

i did the zero pitch with my throttle hold set to zero and put it mid stick

anmatheextreme · 05-27-2012, 06:43 AM

Quote:

Originally Posted by Thefishtank

the pitch curve is linear, whats the ATVs & travel adjust?

i did the zero pitch with my throttle hold set to zero and put it mid stick

Its a menu on the radio if you are using a DX6i or a computerized radio. Whats the radio?

Thefishtank · 05-27-2012, 06:44 AM

Thefishtank · 05-27-2012, 06:57 AM

well i just skimmed through my servo menu...and my servo travel was at 75% so i put it to 100% and now they dont seem to be zero pitched any longer...maby that was it?

05-27-2012, 06:16 AM	#1
Thefishtank Registered Users My HF Map location Join Date: Jan 2012 Location: Ontario	2 mcpx with zero pitch. yet they fly completely different?! Hey so i recently built up an mcpx with mostly microheli parts minus the main hub and frame. and ive got another thats all stock ( minus extended boom ) the MH one has lots of negative pitch and barely any positive and the stock has lots of positive pitch but barely any negative... i put them both to zero pitch...yet this is the outcome. any idea? __________________ Trex 500 Night Vapor Dx8

05-27-2012, 06:22 AM	#2
anmatheextreme Registered Users My HF Map location Join Date: Mar 2011 Location: Athens, Greece	Try adjusting the ATVs or travel adjust on the Tx. Also how do you measure zero pitch? There is a possibility that the swash sit too high/low so you get uneven pitch. Also check pitch curve for linear pitch. __________________ -Andrew Align Trex 600EFL Pro - BeastX To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Blade 450X - Scorpion 2221-6 motor Blade 130x / mCPx HP05s

05-27-2012, 06:38 AM	#3
Thefishtank Registered Users Thread Starter My HF Map location Join Date: Jan 2012 Location: Ontario	the pitch curve is linear, whats the ATVs & travel adjust? i did the zero pitch with my throttle hold set to zero and put it mid stick __________________ Trex 500 Night Vapor Dx8

05-27-2012, 06:44 AM	#5
Thefishtank Registered Users Thread Starter My HF Map location Join Date: Jan 2012 Location: Ontario	dx8 __________________ Trex 500 Night Vapor Dx8

05-27-2012, 06:57 AM	#6
Thefishtank Registered Users Thread Starter My HF Map location Join Date: Jan 2012 Location: Ontario	well i just skimmed through my servo menu...and my servo travel was at 75% so i put it to 100% and now they dont seem to be zero pitched any longer...maby that was it? __________________ Trex 500 Night Vapor Dx8

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode