what shaft on the pyro 700-45 needed for carbon frames?

[motorcycleguyr1]

Which shaft do I get for the carbon frames. Also I thought they offered the pyro in a M shaft size which was perfect for the counter bering on the plastic size. All I see on ready heli is the 700-45L and the 700-45.

[Redlight11]

Originally Posted by motorcycleguyr1

Which shaft do I get for the carbon frames. Also I thought they offered the pyro in a M shaft size which was perfect for the counter bering on the plastic size. All I see on ready heli is the 700-45L and the 700-45.

The medium shaft is the ticket on both the CF and plastic frames if you are using the counter bearing. The long shaft will work but it will extend beyond the bearing and possible affect the size of pack you can use.

[GimpyGolden]

From what I've read it's the Medium shaft(30mm) same as plastic frame with counter bearing.
At least I hope so as I've just trimmed mine and have CF chassis en-route.

Kontronik now calls medium Speacial/SPS
http://www.kontronik.com/images/stor...szeichnung.jpg
Can't find it everywhere but a cut down Long(38mm) does the same job.

[GimpyGolden]

RedLight beat me to it.
Hoping my frame comes today, if not next week I guess.

[motorcycleguyr1]

Thanks for the fast replys. Out of curiosity... Are you guys going to run the SE with the carbon frames or the 3d size?

[GimpyGolden]

Mine is going on my 600SE.
RedLights is no longer on his 600SE since I bought the frame from him.
So I guess neither of us has one in service right now.

[motorcycleguyr1]

Well i only see a L version and a regular 700-45 with no letter at the end available on both ready heli and Helidirect. What happened to the M version?