Futaba 9CH Super and R9SDP Reciever Help

scubaphil · 10-13-2007, 10:54 AM

I was trimming the heli and then i messesed something up so i reset the transmitter and now i get no movement on any of the servos. Please help.

xrbcoronalogoflyer · 10-14-2007, 12:24 PM

when you said you 'reset the transmitter', you turned it off? go back to the model you were working on and scroll through the settings...take a look at pcm/ppm setting...might have changed...
-ken

scubaphil · 10-16-2007, 10:50 AM

no,I reset the parameters, like I reset all the settings to factory.. and now nothing works, no servo movement or anything.

xrbcoronalogoflyer · 10-16-2007, 12:38 PM

i use a 9chps for my raptors, but i'm not too good at explaining the setup--even to myself! this link is very good, and includes the 9c for each step of the transmitter setup...hope it helps...ken

http://www.raptortechnique.com/radiosetup.htm

BarracudaHockey · 10-16-2007, 02:16 PM

Go into the Parameter menu and make sure modulation is set to PCM, if you have to change it, power cycle the transmitter then try it.

scubaphil · 10-16-2007, 09:02 PM

thank you for the advice, i will try it as soon as i get the Rx battery charged up again. For a T-Rex 600, what should the "type" be set to on the transmitter??...sorry for all these questions, i'm new at this and i'm still loking for someone to help me. (thank god for theses forums)

BarracudaHockey · 10-17-2007, 04:20 PM

10-13-2007, 10:54 AM	#1
scubaphil Registered Users Join Date: Sep 2007	Futaba 9CH Super and R9SDP Reciever Help I was trimming the heli and then i messesed something up so i reset the transmitter and now i get no movement on any of the servos. Please help.

10-14-2007, 12:24 PM	#2
xrbcoronalogoflyer Registered Users My HF Map location Join Date: Aug 2005 Location: Pearl City, Hawaii	when you said you 'reset the transmitter', you turned it off? go back to the model you were working on and scroll through the settings...take a look at pcm/ppm setting...might have changed... -ken __________________ Logo10-3D(Stretch)\|HackerC50-14L\|14T\|Jazz55-10-32\|6S\|A123\|JR368\|GY401/9254\|Fut9CHPS2.4 Logo10Deluxe(Stretch)\|Orbit20-10\|21T\|Schulze18.61\|6S\|A123\|Fut9650\|GY401/9254\|R148DP Raptor30V2-OS37-HatoriSAB-6RS \| Raptor50V2-OS50 Hyper-CY MP5 \| Gaui Hurricane200 \| Kaos40-SJ50 \| US1000-OS1.60FX \| AW Yak54-90/120-MLD28 \| GP Reactor1.60-DA50R \|

10-16-2007, 12:38 PM	#4
xrbcoronalogoflyer Registered Users My HF Map location Join Date: Aug 2005 Location: Pearl City, Hawaii	i use a 9chps for my raptors, but i'm not too good at explaining the setup--even to myself! this link is very good, and includes the 9c for each step of the transmitter setup...hope it helps...ken http://www.raptortechnique.com/radiosetup.htm __________________ Logo10-3D(Stretch)\|HackerC50-14L\|14T\|Jazz55-10-32\|6S\|A123\|JR368\|GY401/9254\|Fut9CHPS2.4 Logo10Deluxe(Stretch)\|Orbit20-10\|21T\|Schulze18.61\|6S\|A123\|Fut9650\|GY401/9254\|R148DP Raptor30V2-OS37-HatoriSAB-6RS \| Raptor50V2-OS50 Hyper-CY MP5 \| Gaui Hurricane200 \| Kaos40-SJ50 \| US1000-OS1.60FX \| AW Yak54-90/120-MLD28 \| GP Reactor1.60-DA50R \|

10-16-2007, 02:16 PM	#5
BarracudaHockey Registered Users My HF Map location Join Date: Jan 2005 Location: Jacksonville FL	Go into the Parameter menu and make sure modulation is set to PCM, if you have to change it, power cycle the transmitter then try it. __________________ Andy AMA 77227 Jacksonville FL To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-17-2007, 04:20 PM	#7
BarracudaHockey Registered Users My HF Map location Join Date: Jan 2005 Location: Jacksonville FL	Sr3 __________________ Andy AMA 77227 Jacksonville FL To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-16-2007, 10:50 AM	#3
scubaphil Registered Users Thread Starter Join Date: Sep 2007	no,I reset the parameters, like I reset all the settings to factory.. and now nothing works, no servo movement or anything.

10-16-2007, 09:02 PM	#6
scubaphil Registered Users Thread Starter Join Date: Sep 2007	thank you for the advice, i will try it as soon as i get the Rx battery charged up again. For a T-Rex 600, what should the "type" be set to on the transmitter??...sorry for all these questions, i'm new at this and i'm still loking for someone to help me. (thank god for theses forums)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode