Align 35A Brushless ESC RCE-BL35X - Governor mode

Mathias · 10-22-2007, 09:29 AM

Hi!

Do you hardore 3D guys use the governor mode on your Align 35A Brushless ESC RCE-BL35X on your T-Rex 450's? Yes I am of course interested in other's opinion, but I want to now what the people who flies hard 3D mean.

HeliSmith · 10-22-2007, 09:37 AM

I am an upcoming hardcore 3D pilot.

I run governor mode exclusively on CP helis. Most guys I see out there do not but honestly I didn't care what others were doing. I studied both options and made my decission.

CompuFoil · 10-22-2007, 09:52 AM

I'm definitely not a hard core 3D guy, but I stared using gov mode. I like the consistence in head speed that I get. The one drawback I saw was when accidentally hit the throttle hold switch. Luckily, I was only about three feet up, but if I was higher, I would have been forced to auto before I was setup for it.
Eric

Mathias · 10-22-2007, 10:04 AM

So you can't shoot a auto if you are running gov mode.

If a have understood it right, you haven't a throttlecurve when using governor mode. Is that true?

I am now running 13T and throttlecurve 100-100-100-100-100 with the 430XL motor.

HeliSmith · 10-22-2007, 10:50 AM

You can do an auto with gov mode but don't expect a restart midair if you get the approach wrong. Also if you forget to hit throttle up in gov mode and you bring the stick down you have 0% chance of getting the motor started before you hit the ground. :p

You have a throttle curve flat usually 75% if you are geared right in gov mode.

Alot of guys run straight 100% in non governor mode with the 430XL. I like the consitent head speed too so I chose gov mode.

wbplomp · 10-22-2007, 12:33 PM

I'm having the same question.

Ok... are you saying govener mode workt good with the stock Align RCE-BL35X ???

Boudewijn

10-22-2007, 09:29 AM	#1
Mathias Registered Users Join Date: Apr 2007 Location: Levanger/Kjevik, Norway	Align 35A Brushless ESC RCE-BL35X - Governor mode Hi! Do you hardore 3D guys use the governor mode on your Align 35A Brushless ESC RCE-BL35X on your T-Rex 450's? Yes I am of course interested in other's opinion, but I want to now what the people who flies hard 3D mean.

10-22-2007, 09:37 AM	#2
HeliSmith Registered Users My HF Map location Join Date: May 2007 Location: Chico, California	I am an upcoming hardcore 3D pilot. I run governor mode exclusively on CP helis. Most guys I see out there do not but honestly I didn't care what others were doing. I studied both options and made my decission. __________________ Field Representative for To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

10-22-2007, 09:52 AM	#3
CompuFoil Registered Users My HF Map location Join Date: Jul 2007 Location: Brighton, Mi	I'm definitely not a hard core 3D guy, but I stared using gov mode. I like the consistence in head speed that I get. The one drawback I saw was when accidentally hit the throttle hold switch. Luckily, I was only about three feet up, but if I was higher, I would have been forced to auto before I was setup for it. Eric __________________ GAUI500, V30, Full Metal,9254/401+T600Tail, 500mmCarbons TRex 450SEV2:HS65MG,3400G+DS760, Neu1107/1.5+11T, JAZZ40 Blade CP, ,RotoFly FP, Blade CX, Other Blingers: Deering Golden Era Banjo LG100ZM competition air rifle w/20-50x60 scope ( To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ) Mathews SwitchbackXT Bow

10-22-2007, 10:50 AM	#5
HeliSmith Registered Users My HF Map location Join Date: May 2007 Location: Chico, California	You can do an auto with gov mode but don't expect a restart midair if you get the approach wrong. Also if you forget to hit throttle up in gov mode and you bring the stick down you have 0% chance of getting the motor started before you hit the ground. :p You have a throttle curve flat usually 75% if you are geared right in gov mode. Alot of guys run straight 100% in non governor mode with the 430XL. I like the consitent head speed too so I chose gov mode. __________________ Field Representative for To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-22-2007, 10:04 AM	#4
Mathias Registered Users Thread Starter Join Date: Apr 2007 Location: Levanger/Kjevik, Norway	So you can't shoot a auto if you are running gov mode. If a have understood it right, you haven't a throttlecurve when using governor mode. Is that true? I am now running 13T and throttlecurve 100-100-100-100-100 with the 430XL motor.

10-22-2007, 12:33 PM	#6
wbplomp Registered Users Join Date: Jan 2007 Location: The Netherlands	I'm having the same question. Ok... are you saying govener mode workt good with the stock Align RCE-BL35X ??? Boudewijn