 |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
 |
|
Unregistered
|
||||||
| Blade Helicopters (eFlite) Blade Helicopters (eFlite) CP, CX, mCX CX II, CX III. and others |
|
|
 |
|
|
Thread Tools | Display Modes |
05-17-2009, 09:22 PM
|
#1 |
|
Registered Users
|
Blade CP Pro (Modified) Gyro question
I have the DX-7 (Heli ver) and a severly modified CP Pro similar to what Buildem336 has done. Brushless main with CC Phoenix 10 ESC, Brushless tail with Thunderbird 9 ESC. Has anyone ever set up a Futaba GY401 Gyro without a servo? There's tons of posts about the 401 with a servo but none with an ESC. I've got it hovering with reasonable tail holding but that all changes when I punch the throttle.
Thoughts, Tips, Radio settings??? Thanks in advance. |
|
|
|
05-17-2009, 10:46 PM
|
#2 |
|
Registered Users
|
Send Buildem336 a PM.
|
|
|
|
|
05-20-2009, 06:40 AM
|
#3 |
|
Registered Users
Join Date: Apr 2007
Location: Canada
|
Make sure the GY401 is in digital mode, then tune the gyro so the tail almost wags in a hover...
The GY401 should be rock solid if you have a half decent BL motor on the tail. Happy Flying! |
|
|
|
|
05-20-2009, 08:50 PM
|
#4 |
|
Registered Users
|
digital mode and 100% delay.
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
|
|
|
Unregistered
|
||||||
| Blade Helicopters (eFlite) Blade Helicopters (eFlite) CP, CX, mCX CX II, CX III. and others |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
