How to Set Gyro and Tail neutral??

[electrichelis]

Just find the solution about how to set GT450 V3 Gyro and Tail
neutral from someone. But i am not very sure if its right . Could
anyone can help?
Recommend to choose Head lock type for Gyro and turn off
recolution mixing(RVMX)model on the transmitter ,then set the gain
switch on the transmitter and the gyro to head lock mode.The gain
setting is about 70% and afer transmitter setting ,connect to the
helicopter power for working on tail neutral setting .When
connecting to the helicopter power , can not touch tail rudder
stick and the helicopter .Then wait for 3seconds ,make the tail
servo hom and tail servo at a right angle 90degrees,tail pitch
assembly must be correctly fixed about in the middle of the tracel
of tail rotor shaff for standard neutral setting.
Any good suggestions will be appreciated!
Ty

[Rogerdee]

http://www.helifreak.com/showthread.php?t=41692

Look at this.

Roger

[arcweld]

+1 on the above. great info .3 years of flying and i still from time to time go back to the origional Finless Vids that got me up and running in the early days.