SOLD - Outrage G5 for sale

[3dz]

Hi All,

I have a 'bind and fly' G5 for sale. It has the following:

Stock CF Kit KRG5002 ( Never crashed )
Double Bearing Lower Mixing Arm Upgrade
Stock Glass Fiber 350mm main blades
(RotorTech 350mm currently installed, and in pretty good shape)
CY Radix 350mm brand new (CosFlaw), tested them for a few flights.
Stock tail blades, but (KBDD 59mm currently installed)
Hitec HS5065MG Digital Servos on Cyclic
Futaba S9257 on Tail
Spartan DS760 Gyro
Scorpion HKII 2221 1630KV Brushless Outrunner Motor
Castle Creations - ICE 50 ESC
Spektrum AR6200 RX
3 x Outrage NRG 1300 mAh packs (break in, plus about 20 cycles on each)
Tail boom pack (RG50401-2)
RG50144-SS Damper set

I have the stock tail assembly, but it seems to be a bit sticky, so I currently
have an Align 450 Sport tail (and vert. and horiz. fins) installed. The canopy
is in decent shape, although the rubber grommets are a bit loose/sloppy
and the holes have expanded a bit.

Asking $450 shipped via USPS Parcel Post.

Thanks